Panasonic AG-DV2500P - Manual (Page 17)

E-17
Ⅵ [SEARCH–] / ᮢ
button
• During playback, STILL mode or variable
speed playback in the forward direction,
press this button to slow down the playback
speed.
• During reverse playback or variable speed
playback in the reverse direction, press this
button to speed up the playback speed.
(
☞
page 45)
• When the menu is displayed, use this but-
ton to select the menu items or setting val-
ues.
Ⅵ [P] / ᮣ
button
• During reverse payback/ variable-speed
playback, press this button to execute for-
ward playback.
• When the menu is displayed, use this but-
ton to display the selected menu items.
During date/time or time code setup, press
this button to move the cursor to the right.
Ⅵ [p] / ᮤ
button
• During forward playback/ variable-speed
playback, press this button to execute re-
verse playback.
• When the menu is displayed, press this
button to display the previous menu.
During date/time or time code setup, press
this button to move the cursor to the left.
Ⅵ SET button
During menu display, press this button to
confirm the menu items or setting values.
0 [A. DUB] button
Press this button to perform audio dubbing (af-
ter-recording). (
☞
Page 39, “Audio dubbing”)
! [PAUSE] button
●During recording, audio dubbing or playback,
press this button to pause recording or enter
the STILL mode.
If this button is pressed in the STOP mode,
the STILL mode will be engaged.
●Press this button to resume recording from the
PAUSE mode.
@ [REC] button
● Hold down this button and press the PLAY
button to begin recording.
● During recording, press this button to record
an index on the tape. (when the INDEX WRITE
item of the SYSTEM menu is set to ON)
● When the unit enters the STOP mode, hold-
ing this button down will enable you to check
the value of the time code generator.
#
[F. ADV] button
Each time this button is pressed in the STILL
mode, the image is advanced one frame. When
holding down this button, the image is advanced
continuously frame by frame.
$
[F. REV] button
Each time this button is pressed in the STILL
mode, the image is reversed one frame. When
holding down this button, the image is reversed
continuously frame by frame.
Memo
The image of frame advance playback or
frame reverse playback can be selected with
the STILL MODE item of the SYSTEM menu
or the STILL MODE button on the wireless
remote controller.
%
[INDEX+] button
Press this button to perform an index search in
the forward direction. (
☞
Page 46)
^
[INDEX–] button
Press this button to perform an index search in
the reverse direction. (
☞
Page 46)
& Operation buttons
Ⅵ [PLAY] ( ᮣ
) button
• Press this button to play back.
Ⅵ [FF] ( ᮣᮣ
) button
• Press this button to fast-forward the tape
when the unit is in the STOP mode.
• Press this button to execute fast-forward
playback in the PLAY or STILL mode.
Ⅵ [REW] ( ᮤᮤ
) button
• Press this button to rewind the tape when
the unit is in the STOP mode.
• Press this button to execute reverse play-
back in the PLAY or STILL mode.
Ⅵ [STOP] ( Ⅵ ) button
• Press this button to stop the tape.