Pioneer PDP-502MXE - Manual (Page 12)

8
<ARE1350> En
English
Installation and Connections
Installation and Connections
Installation of the unit
Installation using the supplied display stand
Be sure to fix the supplied stand to the installation
surface.
Use commercially available M8 bolts that are 25 mm
longer than the thickness of the installation surface.
1 Fix the supplied stand to the installation surface at
each of the 4 prepared holes using commercially
available M8 bolts .
2 Insert the supplied washer (large) into the stand.
3 Take off the hole rivets A and A’of this unit using
a screwdriver or a coin.
Front
Rear
798 mm
110 mm
4 Set this unit in the stand.
5 Fix this unit using the supplied washer and bolt.
Use a 6 mm hex wrench
to bolt them.
CAUTION
Because this unit weighs about 40 kg and has little depth making
it unstable, please use 2 people or more when packing, carrying
or installing.
A A '