Panasonic RAMSA WP-1200B/G User Manual
Rated Power Output
120 W + 120 W / 8
Ω, 20 Hz ~ 20 kHz, less than 0.3 % THD
200 W + 200 W / 4
Ω, 40 Hz ~ 20 kHz, less than 0.3 % THD
400 W / 8
Ω, 20 Hz ~ 20 kHz
20 Hz ~ 20 kHz, +0 dB, –0.5 dB at 4
Ω, 1 W output
Total Harmonic Distortion
Less than 0.3 %, 40 Hz ~ 20 kHz
Less than 0.1 %, 1 kHz
IM Distortion (SMPTE, CCIF, DIM100) Less than 0.3 %
–60 dB or less (at 20 kHz)
27.2 dB at 1 kHz
+4 dB at rated output / 4
Greater than 40 dB at 1 kHz
Greater than 100 dB at 1 kHz, 8
SN Ratio (DIN)
Greater than 100 dB below 8
220 ~ 240 V AC (50 Hz) (G)
Switches and Controls
Power switch, Input Sensitivity Potentiometer
Power indicator, Peak indicator, Protection indicator
Connectors & Terminals
Input Connectors: famale XLR half lock type x 2
TRS phone jack x 2
480 (W) x 88 (H) x 393 (D) mm
P O W E R A M P L I F I E R S
Power Amplifier (200W+200W)
Rated Power Output 200 W+200 W (4
Ω), 120 W+120 W (8 Ω)
Switching possible between stereo, mono and BTL modes.
Newly developed servo control system with superior radiation capability.
VI limiter and Crow-Bar circuit used to prevent trouble from occurring.
Class H circuitry improves output efficiency.
Simple and rational circuit design ensures stable operation.
Highly balanced design ensures reliability, durability and tone quality.
Peak level indicator (A)
Power ON/OFF switch
Power ON indicator
Protect indicator (B)
Peak level indicator (B)
Protect indicator (A)