Appendix e install xplug control utility, Install on web server, Install to local pc – Planet Technology ICA-100 User Manual
Page 70: Install xplug control utility, Appendix e
Appendix C - Specifications
67
Appendix E
Install Xplug Control Utility
Install on Web Server
STEP 1
Copy xplug.ocx to the home directory of a web server.
STEP 2
Log on the Home page of ICA-100 series, click on the
“System Administration” link.
The system page will appear.
STEP 3
Locate the
“Loading ActiveX From” field on system page. Fill the field with web server’s
address. Either IP address or Internet address will do.
Once the settings are completed, users are able to access ICA-100 series from the
web browser by selecting the Image View
– ActiveX mode.
Install to Local PC
STEP 1
Insert the CD-ROM into the CD-ROM drive to initiate the autorun program. A menu
screen will appear as follows:
STEP 2
Click on the "Xplug Control" hyperlink to activate the installation procedure for the
plug-in program.
If the above screen is not shown, you can start the installation as follows.
E