Pioneer ANH-P9R-BK - Manual (Page 11)

Before You Start
En 11
Protecting your unit from theft
The front panel can be detached from the head
unit and stored in the protective case provided
to discourage theft.
• If the front panel is not detached from the
head unit within five seconds of turning off
the ignition, a warning tone will sound.
• You can turn off the warning tone. See Setting
the warning tone on page 83.
Important
• Never use force or grip the display and the
buttons tightly when removing or attaching.
• Avoid subjecting the front panel to excessive
shocks.
• Keep the front panel out of direct sunlight and
high temperatures.
Removing the front panel
1 Press OPEN to open the front panel.
2 Grip the left side of the front panel and pull
it gently outward.
Take care not to grip it tightly or drop it.
3 Put the front panel into the protective case
provided for safe keeping.
Attaching the front panel
Replace the front panel by holding it upright
to this unit and clipping it securely into the
mounting hooks.
Resetting the Microprocessor
When the ignition switch is turned OFF, press-
ing
RESET lets you reset the microprocessor.
Press RESET in the following cases.
• When this unit fails to operate correctly.
• When strange (incorrect) messages appear
on the display.
1 Turn the ignition switch OFF.
2 Press RESET .
Use a pen tip or other pointed instrument.
English
Espa
ñ
ol
Deutsch
F
ran
ç
ais
Italiano
Nederlands
01
Section