Pioneer ANH-P9R-BK - Manual (Page 74)

TV Tuner
Display and indicators
2 1
3
1 Band
2 Preset number
3 Channel
Basic operation
1 Press SOURCE to select the TV tuner.
Press SOURCE until “Television” appears.
2 Raise or lower the volume.
Rolling the VOLUME changes the volume level.
3 Press
2 or 3 to tune in to a station.
• If you press and hold
2 or 3 for about one
second and then release, you can perform seek
tuning.
Storing and recalling broadcast
stations
If you press any of the buttons 1 – 6 (or 7 – 12 ),
you can easily store up to 12 broadcast stations
for later recall.
Storing broadcast stations
1 Press NEXT to display “1” – “6” (or “7” –
“12”).
Press
NEXT until “1” – “6” (or “7” – “12”)
appears.
2 When you find a station that you want to
store in memory, press and hold any of the
buttons 1 – 6 (or 7 – 12) until the preset num-
ber stops flashing.
The station is stored in memory under the
selected button.
Notes
• Up to 12 stations can be memorized in one
band.
• This product allows you to store and recall
directly using preset channels 7 –12.
Recalling broadcast stations
1 Press NEXT to display “1” – “6” (or “7” –
“12”.
Press
NEXT until “1” – “6” (or “7” – “12”)
appears.
2 Press any of the buttons 1 – 6 (or 7 – 12) to
recall the station preset under that button.
Note
• You can also use
5 or ∞ to recall broadcast
stations memorized under the buttons 1 – 12.
The following explains how to use this
product to control a TV tuner, which is
sold separately. For details of TV tuner-
specific operation/features, see your TV
tuner’s manual.
• With this product, you can operate preset
channel list as one additional function.
En 74
09
Section