Initial settings initial settings menu 81, Initial settings menu operation 81, Using reverse mode 81 using the feature demo 81 – Pioneer ANH-P9R-BK User Manual

Page 81: Initial settings, Initial settings menu, Using reverse mode, Using the feature demo

Advertising
background image

Initial Settings

En

81

Initial settings menu

The initial settings menu has the following func-
tions:

Note

DAB P.

is displayed only when a separately

sold hide-away DAB tuner (e.g., GEX-
P700DAB) is connected.

Initial settings menu operation

You can operate the initial settings menu only
when the source is off.

1 Press and hold

SOURCE

to turn the source

off.

2 Press and hold

1 to enter the initial

settings menu.
• When the source is off, you can check the
location of “1” by turning on the feature demo.

Note

• Press

BAND/ESC

to cancel the initial settings

menu.

Using reverse mode

If you do not carry out an operation within about
30 seconds, screen indications will start to
reverse, and then continue reversing every 10
seconds.
You can turn the reverse mode on or off.

1 With the source turned off, press and hold
1 to select the reverse mode.

2 Press

REV

to turn the reverse mode on.

ON

appears in the display.

• Press

REV

again to turn the reverse mode off.

Using the feature demo

The feature demo automatically starts when
power to this product is switched off while the
ignition switch is set to ACC or ON.
You can turn the feature demo on or off.

1 With the source turned off, press and hold

1.

2 Press

F.DEMO

to select the feature demo

mode.

3 Press

F.DEMO

to turn the feature demo on.

ON

appears in the display.

• Press

F.DEMO

again to turn the feature demo

off.

Note

• The red lead (ACC) of this product should be

connected to a terminal coupled with ignition
switch ON/OFF operations. If this is not done,
the vehicle battery may be drained.

English

Espa

ñ

ol

Deutsch

F

ran

ç

ais

Italiano

Nederlands

11

Section

Advertising