Polycom VoiceStation 300 - Manual (Page 16)

Installing KIRK Wireless Server 300
3–4
KWS300 - Reset Button
It is possible to restart or reset the KWS300 by pressing the Reset button on the
faceplate of the KWS300.
Resetting the KWS300 Hardware
This section contains a description of the different actions that take place when
pressing the Reset button.
Table 3-2 LED Indicator Description - Front Cover
LED Indicator Meaning
Steady green OK and idle
Slow green flashing OK and active voice call
Fast red flashing Error
Steady red Reset/shutdown in progress
Steady red for 5 seconds
followed by fast red flashing Reset to factory settings
Table 3-3 LED Indicator Description - Faceplate
LED Indicator Meaning
LINK/Activity Indicator - green Link layer software has established
connection
LINK/Activity Indicator - green
flashing Activity
Table 3-4 Reset Button Description
Press button Action
Short press (2 to 5 sec.) System restarts when button is released.
Long press (5 to 9 sec.)
until front LED flashes
red, then release button Resets the system to factory default settings (original
IP settings and empty user data base) and restarts the
system.
Firmware version is not affected.