Setting network number (for wireless lan), User] settings, Setting ip – Panasonic TH-LB30NT User Manual
Page 53: User] settings …………………………………………………… 53, Setting ip ………………………………………………………… 53, Network/security setting of the projector, 53 select [wireless lan] at the network menu, Cont.), How to display ip address setting menu
53
Select [WIRELESS LAN] at the network menu.
1
Select the number to be connected with the [
] buttons.
2
RETURN
ENTER
SELECT
LANGUAGE
PROJECTOR SETUP
SECURITY
POSITION
DISPLAY OPTION
WIRED LAN
NAME CHANGE
PASSWORD
PASSWORD CHANGE
NETWORK STANDBY
NETWORK CONTROL
LIVE MODE CUT IN
COMPUTER SEARCH
MULTI-LIVE
STATUS
INITIALIZE
ON
OFF
OFF
OFF
PICTURE
NETWORK
S-MAP
WIRELESS LAN
Setting network number (for wireless LAN)
Network/Security setting of the projector
(cont.)
You can configure more precise network settings, if you select from [USER1] to [USER3] (user) for [Wireless LAN] in the
network menu. For network settings, contact your network administrator.
[USER] settings
How to display IP address setting menu
Press [WIRELESS LAN]→[USER1] - [USER3]→[ENTER] at the network menu.
DHCP
※
:
ON: If a DHCP server exists in the network to which the projector is connected, the IP address will automatically be
acquired.
OFF: If a DHCP server does not exist in the network to which the projector is connected, additionally set [IP ADDRESS
※
],
[SUBNETMASK
※
] and [DEFAULT GATEWAY
※
].
Setting IP
WIRELESS DETAILED SETUP
NEXT
CANCEL
RETURN
SELECT
ENTER
DHCP
IP ADDRESS
SUBNETMASK
DEFAULT GATEWAY
192.168. 11.100
OFF
192.168. 11. 1
255.255.255. 0
NAME CHANGE
USER1
1/3
USER1
A wired LAN and wireless LAN cannot be used in the same segment.
Selecting [OFF] disables the wireless LAN.
• Network number
Off, [S-MAP], [1]-[4], [USER1]-[USER3]