Copying your tapes (dubbing), Connection, Vcr operation – Panasonic PV-D4732 User Manual

Page 35

Advertising
background image

35

Copying Your Tapes (Dubbing)

1

Insert a pre-recorded tape.

2

Insert a blank tape with record tab.

Press REC, then PAUSE/STILL
immediately to enter REC/PAUSE
mode.

3

Press INPUT to set DECK Input mode to
LINE for Video Input.

(See “Selecting the Input Mode” below.)

4

Press PLAY to start dubbing.
Playing VCR starts playback.

Press PAUSE/STILL to start dubbing.
DECK starts recording.

Press STOP to stop dubbing.

Caution:

• Unauthorized exchanging and/or copying of copyrighted recordings may be

copyright infringement.

• Please note that some tapes cannot be dubbed on DECK. Also, it is not

possible to dub DVD/ Video CD/ CD to VHS tapes using DECK.

Playing (Source) VCR

Recording (Editing) DECK

5

To Monitor Dubbing on TV

1 Turn TV on and tune to the Recording

VCR channel (CH 3 or CH 4).

2 Set the VCR/TV Selector on DECK to

“VCR.”

Note

• Dubbing tapes protected with Copy

Guard will result in poor quality
recordings.

Connection

Press STOP to stop dubbing.

Press PLAY, then PAUSE/STILL
immediately to enter PLAY/PAUSE
mode.

The operation of steps 4 and 5 must be done on the
playing and recording VCRs at the same time.

Connect VIDEO OUT terminal on Playing VCR to VIDEO IN terminal on DECK.
To monitor the dubbing, also connect TV as shown.

Connect “L” and “R” AUDIO OUT terminals on Playing VCR to “L” and “R”
AUDIO IN terminals on DECK.

In place of Playing VCR, you can use other equipment, such as a Camcorder.
Simply connect the unit’s Audio/Video outputs to DECK.

Selecting the Input Mode

Method 1: Press INPUT repeatedly.

Channel Number

↔ LINE1 ↔

↔ LINE2

Method 2: Press CH / .

Display will change as below.

Front of DECK

VIDEO IN 2

L-AUDIO IN2-R

(Audio/Video In Terminals
on the front of DECK are
available)

IN FROM ANT.

OUT TO TV

IN 1

VHF/UHF

OUT

TV

OUT

VHF/

UHF

DVD/VCR DECK

VIDEO

AUDIO1

L
R

VCR/ Camcorder

(Hi-Fi)

VIDEO

AUDIO

L

R

• “L1” or “L2” lights up on Multi Function Display
(about 4 seconds) when LINE1 or LINE2 is selected.

• LINE1: For rear audio/video connection.

LINE2: For front audio/video connection.

1

2

VCR

Operation

1

2

3

125

LINE1

(CABLE)

69

(TV)

or

LINE2

Press

Press

PV-D4732S P26-35 (2nd) [LSQT0618B].p65

2002/05/23, 18:13

35

Advertising
This manual is related to the following products: