Panasonic KX-FPC96 - Manual (Page 83)

“TONE”: For tone dial service.
“PULSE”: For rotary pulse dial
service.
This setting is also available after
activating the FAX ONLY mode
(p. 61).
See page 15 for details.
“VOX”: Unlimited
“1 MIN”: Up to 1 minute
ID = 111
83
Features Summary
Basic features !
Programming table
Code
#01
To set the date and time
SET 1 DATE 1 & 1 TIME
mm/dd/yy
hh:mm
(2 digits for
each entry)
See pages 16 and 17 for details.
See page 18 for details.
“ERROR”: The sending report will
be printed only when fax
transmission fails (p. 52).
“ON”: The sending report will be
printed after every transmission.
#02
To set your logo
YOUR 1 LOGO (Up to 30
characters)
Display & Feature Settings How the unit operates
#03
To set your facsimile telephone
number
YOUR 1 FAX 1 NO.
(Up to 20
digits)
#04 To print and check the sending
report for fax transmission results
SENDING 1 REPORT
ERROR
ON
OFF
#13 If you cannot dial, change the
setting depending on your
telephone line service.
DIALING 1 MODE
TONE
PULSE
(The default setting is in bold type.)
1. Follow steps 1–3 on page 82.
2. Enter any 3–digit number except a
number using 0 or 7.
3. Press .
4. Press .
MENU
SET
VOX
1 MIN
#06
To change the number of rings
before the unit answers a call
in the FAX ONLY mode
FAX 1 RING 1 COUNT
1, 2, 3, 4
To change the number of rings
before the unit answers a call
in the TAD/FAX mode
TAD 1 RING 1 COUNT
1, 2, 3, 4
TOLL SAVER
RINGER OFF
#10
To change the recording time for an
incoming message
RECORDING 1 TIME
To operate the answering device
from a remote location
REMOTE 1 TAD 1 ID
#11
This setting is also available after
activating the TAD/FAX mode.
See page 68 for details.