Precor 776i - Manual (Page 98)

Changing the Units of Measure
Display measurements can appear in either Metric or U.S.
Standard. To change this setting, perform the following steps:
1.
2.
3.
4.
1.
2.
3.
4.
Press OPTIONS, and then press the down key on the
navigational keypad until
U N I T S appears.
Press OK. U N I T S scrolls across the display and is replaced by
one of two options: U . S . or M E T R I C .
Toggle between the two options by pressing the down arrow
key on the navigational keypad.
When you are ready, press OK to select the displayed unit of
measure. A message scrolls across the display indicating that
the unit of measure has changed.
Selecting a Language
You can choose to display text messages in several different
languages. To select a different language before or during an
exercise session, take the following steps:
Press OPTIONS, and then press the down key on the
navigational keypad until
L A N G U A G E appears.
Press OK.
L A N G U A G E scrolls across the display and is replaced by one
of several language options.
Scroll through the available language options by continually
pressing the down key on the navigational keypad.
When you are ready, press OK to select the displayed
language. A message scrolls across the display indicating that
the language has been changed.
User's Reference Manual: Exercise Session 48