Panasonic AJ-D230HP - Manual (Page 29)

Set-up Menus
VIDEO menu
Item
No.
S u p e r i m p o s e d No.
.
display
y
600 VIDEO MODE 0000
0001
601 V-MUTE SEL 0000
0001
602 CC (F1) BLANK 0000
0001
603 CC (F2) BLANK 0000
0001
604 STD/NSTD SEL 0000
0001
605 FREEZE SEL 0000
0001
Setting
S u p e r i m p o s e d
d
display
y
B/W
COLOR
N-MUTE
LOW-RF
BLANK
THRU
BLANK
THRU
AUTO
NSTD
FIELD
FRAME
Description of settings
For setting video signal recording and playback.
0: For using monochrome signals.
1: For using color signals.
To use monochrome signals for recording and
playback, set this item to the B/W mode. To use
normal color signals, set it to the COLOR mode.
If color signals are recorded in the B/W mode, the
playback images will appear with abnormal colors.
This selects whether the video signals are to be muted
during playback under low RF conditions or when the
servo lock is disengaged.
0: Video signals are not muted.
1: Video signals are muted.
This selects ON or OFF for the closed capture signal in
the first field.
0: Signal is forcibly blanked.
1: Signal is not blanked.
This selects ON or OFF for the closed capture signal in
the second field.
0: Signal is forcibly blanked.
1: Signal is not blanked.
This selects the video signal processing.
0: Mode is set automatically according to the input.
1: Mode is forcibly set to nonstandard mode.
This selects which type of freeze mode is to be
established for the still picture during PLAY PAUSE or
frame advance.
0: Field freeze
1: Frame freeze
The underlined number and item are the factory settings.
29