Pitney Bowes W680 - Manual (Page 16)

2-4 Pitney Bowes W660/W680 Operator Guide
2 • Setting Up the W660/W680 Printer
The assembled printer should look like the picture below. The
parts you have to put together are identified.
Refer to this picture as you set up your printer. Follow the steps
on pages 2-7 through 2-15. The following product orientation
will be useful in performing these steps:
Front is the area of the printer housing the LCD.
Rear is the area of the printer with the cable interface panel.
Left side is the input area of the printer.
Right side is the output area of the printer.
Setting Up the
W660/W680
Feed Ramp
and Lock Knob
Sliding
Fence
Wireframe
Input Stacker
Output Stacker