Panasonic TN Relay - Manual

TN
ORDERING INFORMATION
SLIM POLARIZED RELAY
TN RELAYS
RoHS Directive compatibility information
http://www.mew.co.jp/ac/e/environment/
FEATURES
1. 2 Form C Slim type
14.0(L) × 9.0(W) × 5.0(H) .551(L) ×
.354(W) × .197(H)
Small header area makes higher
density mounting possible
2. Nominal operating power:
High sensitivity of 140mW (Single
side stable type)
By using the highly efficient polar
magnetic circuit “seesaw balance
mechanism”, a nominal operating
power of 140 mW (minimum operating
power of 79 mW) has been achieved.
3. Surge breakdown voltage:
1500 V FCC Part 68
4. Outstanding vibration and shock
resistance.
Functional shock resistance: 490 m/s
2
Destructive shock resistance: 980 m/s 2
Functional vibration resistance:
10 to 55 Hz (at double amplitude of
3 mm
.118 inch )
Destructive vibration resistance:
10 to 55 Hz (at double amplitude of
5 mm
.197 inch )
5. High density mounting possible
High-efficiency magnetic circuits
ensure low magnetic flux leakage.
Because characteristics are little
changed by proximity mounting, high-
density mounting is possible.
6. The use of gold-clad twin crossbar
contacts ensures high contact
reliability.
*We also offer a range of products
with AgPd contacts suitable for use
in low level load analog circuits
(Max. 10V DC 10 mA).
*SX relays designed for low level
loads are also available.
7. Low thermal electromotive force
As well as low power consumption of
140 mW, use of a structure with
separate coil and contact sections has
reduced thermal electromotive force to
the low level of approximately 5
µV.
8. Latching types also available
9. Self-clinching terminal also
available
10. Sealed construction allows
automatic washing.
TYPICAL APPLICATIONS
• Communications
• Measurement equipment
• OA equipment
• Industrial machines
Coil voltage (DC)*
3, 4.5, 5, 6, 9, 12, 24, 48V
Contact arrangement
2: 2 Form C
TN 2
Terminal shape
Nil:
H:
Standard PC board terminal
Self-clinching terminal
Operating function
Nil:
L:
L2:
Single side stable
1 coil latching
2 coil latching
Notes: 1. *48 V coil type: Single side stable only
2. In case of 5 V drive circuit, it is recommended to use 4.5 V type relay.
All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.