Panasonic AJ-HD1700PE - Manual (Page 119)

119
If “T&S&M” has been selected as the setup menu item
No.006 (DISPLAY SEL) setting, a message appears
in the mode display area whenever a warning or error
has occurred. When a multiple number of errors have
occurred, the one with the highest priority is displayed.
Error messages
Priority Display and description
Higher
Lower
Error messages (see error message table): When any
problem arises with the VTR’s operation, the AUTO OFF
lamp lights, and an error message is displayed.
INT SG: If, when “INT SG” has been selected as the audio
input setting by
(VID IN) on the <VIDEO> menu or by the
<AUDIO> or <AUDIO SHIFT1> menu, and the EDIT button is
pressed, this message is displayed for the first two seconds
when editing is started. In the same way, it is displayed for the
first two seconds when recording is started.
F1
NO INPUT: If, when input signals (but not analog audio
signals) are not supplied to the input connector selected by
(VID IN) on the <VIDEO> menu or by the <AUDIO> or
<AUDIO SHIFT1> menu, the EDIT button is pressed, this
message is displayed for the first two seconds when editing
is started. In the same way, it is displayed for the first two
seconds when recording is started.
F1
Warning messages (see warning message table): When
a warning occurs in this VTR, the warning lamp lights, and a
warning message is displayed. When a multiple number of
warnings have occurred, the one with the highest priority is
displayed.
∫ Displaying the hour-meter information
Turn the ADJ dial to move the cursor (
¢
), and the
description for the item where the cursor is located is
shown as a superimposed display.
<Note>
The resettable table hour-meter information items will
be reset by your dealer when maintenance or other
work is performed.
No./Item Description
H00
OPERATION
Displays in 1-hour increments the time during
which power has been supplied.
H01
DRUM RUN
Displays in 1-hour increments the amount of
time during which the drum has rotated.
H02
TAPE RUN
Displays in 1-hour increments the amount of time during
which the tape has been running in the FF, REW, PLAY,
SEARCH (JOG, VAR and SHTL), REC and EDIT modes (but
not in the JOG, VAR, SHTL or STILL mode).
H03
THREADING
Displays in 1-time increments the number of
times the tape has been threaded (loaded) and
unthreaded (unloaded).
H04
F LOADING
Displays in 1-time increments the number of
front loading operations.
H05
LCD ON
Displays in 1-hour increments the amount of
time during which the LCD monitor has lighted.
H15
LCD ON r
Displays in 1-hour increments the amount of
time during which the LCD monitor has lighted.
(Can be reset.)
H11
DRUM RUNr
Displays in 1-hour increments the amount of
time during which the drum has rotated.
(Can be reset.)
H13
THREADINGr
Displays in 1-time increments the number of
times the tape has been threaded (loaded) and
unthreaded (unloaded). (Can be reset.)
H30
POWER ON
Displays the number of times the power has
been turned on.
H12
TAPE RUNr
Displays in 1-hour increments the amount of time
during which the tape has been running in the FF,
REW, PLAY, SEARCH (JOG, VAR and SHTL),
REC and EDIT modes (but not in the JOG, VAR,
SHTL or STILL mode). (Can be reset.)
H14
F LOADINGr
Displays in 1-time increments the number of
front loading operations.
(Can be reset.)
F1