Function menus, Status display 1 (continued) – Panasonic AJ-HD1700PE User Manual
Page 42
42
VTR
Description of settings
Status display 1 (continued)
REF
Output reference
This displays the output
reference status.
HD25
HD50
The HD REF input signal has been selected as the reference. The frame
frequency is 25 Hz.
HD23
The HD REF input signal has been selected as the reference. The frame
frequency is 23.98 Hz.
The HD REF input signal has been selected as the reference. The field
frequency is 50 Hz.
HD59
The HD REF input signal has been selected as the reference. The field
frequency is 59.94 Hz.
HD60
The HD REF input signal has been selected as the reference. The field
frequency is 60 Hz.
IN50
The HD serial input signal has been selected as the reference. The field
frequency is 50 Hz.
HD24
The HD REF input signal has been selected as the reference. The frame
frequency is 24 Hz.
IN59
The HD serial input signal has been selected as the reference. The field
frequency is 59.94 Hz.
IN60
The HD serial input signal has been selected as the reference. The field
frequency is 60 Hz.
INT23
The signal (23.98 Hz) from the internal generator has been selected as the reference.
INT25
The signal (25 Hz) from the internal generator has been selected as the reference.
INT50
The signal (50 Hz) from the internal generator has been selected as the reference.
INT59
The signal (59.94 Hz) from the internal generator has been selected as the reference.
INT60
The signal (60 Hz) from the internal generator has been selected as the reference.
NTSC59
The SD REF input signal has been selected as the reference. The field
frequency is 59.94 Hz.
PAL50
The SD REF input signal has been selected as the reference. The field
frequency is 50 Hz.
INT59N
The SD REF signal has been selected by the OUT REF setting. Since the
SD REF signal is not input, the signal (59.94 Hz) from the internal
generator is selected as the reference.
INT50P
The SD REF input signal has been selected by the OUT REF setting.
Since the SD REF signal is not input, the signal (50 Hz) from the internal
generator is selected as the reference.
INT24
The signal (24 Hz) from the internal generator has been selected as the reference.
Function menus