Panasonic AJ-HD1700PE - Manual (Page 79)

00
COARSE
For adjusting the VIDEO OUT system phase in 1H
steps.
j : To advance the phase. i : To delay the phase.
0000 j 5H
: :
0005 0H
: :
0010 5H
<Note>
This setting remains unchanged
even when the factory setting
operation is performed.
No./Item Description of setting
12
SYS H
(HD)*
UP
For adjusting the system phase of the HD SDI output.
When the
button is pressed, the display transfers to
the submenu screen; press the button again to
return the display from the submenu screen.
SHIFT
SHIFT
00
COARSE
For adjusting the system phase of the HD SDI
output in 1H steps.
j : To advance the phase. i : To delay the phase.
0000 j 5H
: :
0005 0H
: :
0010 5H
<Note>
This setting remains unchanged
even when the factory setting
operation is performed.
01
FINE
For adjusting the HD SDI output system
phase in 13.5ns steps.
j : To advance the phase. i : To delay the phase.
<59/60Hz> <23/24Hz> <50Hz, 25Hz (HD,SD)>
0000 j 1100 0000 j 1375 0000 j 1320
: : : : : :
1100 0 1375 0 1320 0
: : : : : :
2200 1100 2700 1375 2640 1320
<Note>
This setting remains unchanged even when the
factory setting operation is performed.
Submenu screen
79
01
FINE
For adjusting the SD SDI system phase in 37ns
steps for 480i outputs and in 54ns steps for 480p
outputs.
j : To advance the phase. i : To delay the phase.
<59/60Hz, 23/24Hz> <50Hz, 25Hz (HD, SD)>
0000 j 858 0000 j 864
: : : :
0858 0 0864 0
: : : :
1716 858 1728 864
System menus
No./Item Description of setting
15
VO SYS
H (SD)*
DW
For adjusting the system phase of the VIDEO OUT.
When the
button is pressed, the display transfers to
the submenu screen; press the button again to
return the display from the submenu screen.
SHIFT
SHIFT
01
FINE
For adjusting the VIDEO OUT system phase in
37ns steps.
j : To advance the phase. i : To delay the phase.
<59/60Hz, 23/24Hz> <50Hz, 25Hz (HD, SD)>
0000 j 858 0000 j 864
: : : :
0858 0 0864 0
: : : :
1716 858 1728 864
16
SD SYS
H (SD)*
DW
For adjusting the system phase of the SD SDI.
When the
button is pressed, the display transfers to
the submenu screen; press the button again to
return the display from the submenu screen.
SHIFT
SHIFT
Submenu screen
The underlining (__) denotes the factory setting mode.
*UP: This is for HD outputs (during HD tape playback or up-
conversion outputs).
*DW: This is for SD outputs (during SD tape playback or down-
conversion outputs).
00
COARSE
For adjusting the SD SDI system phase in 1H
steps.
j : To advance the phase. i : To delay the phase.
0000 j 5H
: :
0005 0H
: :
0010 5H
Submenu screen
<Note>
This setting remains unchanged
even when the factory setting
operation is performed.
14
SYS SC
(SD)*
DW
For adjusting the system phase over a total
variable range of more than
d 180 o .
j : To advance the phase. i : To delay the phase.
<59/60Hz, 23/24Hz> <50Hz, 25Hz (HD, SD)
0000 j 108 0000 j 115
: : : :
0108 0 0115 0
: : : :
0216 108 0230 115
<Note>
This setting remains unchanged even when the
factory setting operation is performed.
<Note>
This setting remains unchanged even when the
factory setting operation is performed.
<Note>
This setting remains unchanged even when the
factory setting operation is performed.