Interface, Setup menus – Panasonic AJ-HD1700PE User Manual

Page 87

Advertising
background image

204

RS232C SEL

For selecting whether the RS-232C connector
is to function.

0000

OFF:

The RS-232C connector does
not function.

0001

ON:

The RS-232C connector functions.

87

Setup menus

The underlining (__) denotes the factory setting mode.

<INTERFACE>

No./Item

Description of setting

200

PARA RUN

For selecting whether to operate two or more
VTRs in synchronization.

0000

DIS:

The VTRs are not operated in
synchronization.

0001

ENA:

The VTRs are operated in
synchronization.

<Note>
To operate the VTRs in synchronization, set all the
VTRs to 1 (ENA). (Refer to pages 14 and 19.)

202

ID SEL

For setting what ID information is to be
returned to the controller.

0000

OTHER

0001 DVCPRO
0002

ORIG

<Notes>
• For 0 (OTHER), the ID information of VTRs other than

DVCPRO models is set.

• Select 2 (ORIG) only when the VTR is connected to a

Panasonic controller (such as the AJ-A900, an
optional accessory).

• Select 1 (DVCPRO) or 2 (ORIG) if the 23/24 Hz mode

has been selected by system menu item No.25
(SYSTEM FREQ).

205

BAUD RATE

For setting the RS-232C data transfer speed
(baud rate).

0000

300

0001

600

0002

1200

0003

2400

0004

4800

0005

9600

207

STOP BIT

For setting the number of RS-232C stop bits.
(Unit: bits)

0000

1

0001

2

206

DATA
LENGTH

For setting the RS-232C data length.
(Unit: bits)

0000

7

0001

8

208

PARITY

For setting whether the RS-232C parity bit is
to be used and, if it is used, whether even or
odd parity is to apply.

0000

NON:

The parity bit is not used.

0001

ODD:

The parity bit is used with an odd parity.

0002

EVEN:

The parity bit is used with an even parity.

No./Item

Description of setting

209

RETURN ACK

For setting whether or not to return the ACK
code when a command is received from RS-
232C.

0000

OFF:

The ACK code is not returned.

0001

ON:

The ACK code is returned.

212

MASTER
PORT

For selecting the remote control connector
for controlling the slave machine when this
VTR is to be used as the master machine for
deck-to-deck operations.

0001

IN/OUT:

The IN/OUT connector is used.

0001

OUT:

The OUT connector is used.

<Note>
This setting takes effect only when the 9P button has
been set to LOCAL (LED off).

Advertising