Polycom KIRK 7010 - Manual (Page 51)

Polycom KIRK 7010-7020-7040 User Guide Alerting Volume
52 Polycom, Inc.
4 Scroll to the desired ring tone and press Change to select and listen to the
chosen ring tone. Repeat the process if you want to choose and listen to
other ring tones.
Alerting Volume
Alerts are short beeps that appear when:
• You receive a new message.
• You send a message.
• The handset is moving out of range.
• The handset is out of range.
• The battery capacity is low.
• You create a login.
To adjust alerting volume:
1 Press Menu to enter main menu.
2 Scroll to Settings and press Select.
3 Scroll to Alerting volume and press Select.
4 Press the left or right side of the navigation key to adjust the volume of the
ringer.
5 Press Set.
Vibrator (Not available on 7010)
When vibrator is turned on, the handset will vibrate when an incoming call
arrives.
To turn vibrator on/off:
1 Press Menu to enter main menu.
2 Scroll to Settings and press Select.
3 Scroll to Vibrator and press Select.
4 Scroll to On or Off and press Change.
Note: When charging, handset will not vibrate.