Out of range, Changing settings of out of range – Polycom KIRK 7010 User Manual
Page 55
Polycom KIRK 7010-7020-7040 User Guide
Out of Range
56
Polycom, Inc.
To change settings of auto answer:
1
Press Menu to enter main menu.
2
Scroll to Settings and press Select.
3
Scroll to Auto answer and press Select.
4
Scroll to Settings and press Change.
5
Scroll to the desired setting and press Select.
Out of Range
The out of range indicator appears when handset is moving out of or already is
out of range of base station.
Note:
When the handset has been outside the coverage area, it can take up
to 30 seconds before the handset is back on the system after re-entering
coverage area.
To turn out of range on/off:
1
Press Menu to enter main menu.
2
Scroll to Settings and press Select.
3
Scroll to Out of range and press Select.
4
Scroll to On or Off and press Change.
Changing Settings of Out of Range
The handset offers two types of out of range alerts:
•
Icon only
•
Tone (beep) + icon
With the out of range indicator turned on:
•
If handset is moving out of range, the low signal icon
will appear in
display.
•
If the handset gets out of range, the no signal icon
will appear in display.
If tone + icon is selected, beeps will appear with short intervals as long as
the handset is out of range.
To change the settings:
1
Press Menu to enter main menu.
2
Scroll to Settings and press Select.
3
Scroll to Out of range and press Select.