Polycom KIRK 7010 - Manual (Page 60)

Polycom, Inc. 61
Polycom Kirk 7010-7020-7040 User Guide Settings
Long Key
The long key function supports system features and defines a long key press to
digits between 0-9. The long key press can be defined as speed dials (refer to
“Speed Dial” on page 23 ) or as MSF messages. MSF messages are system
dependent. If supported by the subscribed system, a MSF message sent to the
system could for example return system features to the handset.
To change long key definition:
1 Press Menu to enter main menu.
2 Scroll to Settings and press Select.
3 Scroll to Advanced and press Select.
4 Scroll to Long key and press Select.
5 Scroll to desired definition and press Change.
Login
Before you can use the registered handset it is necessary to subscribe the
handset to a system (login).
The handset can be subscribed to up to 10 different
systems. To subscribe to a system, refer to “Creating a Login” on page 62 .
Selecting a Login
If you want to change to another system manually, do the following:
1 Press Menu to enter main menu.
2 Scroll to Settings and press Select.
3 Scroll to Advanced and press Select.
4 Scroll to Login and press Select.
5 Scroll to Select Login and press Select.
6 Scroll to the desired login and press Select.
Removing a Login
Logins can be removed from the system in use and from the 9 other systems (if
connected).
Note: Removing a login requires a password. Password is factory set at
0000.
1 Press Menu to enter main menu.
2 Scroll to Settings and press Select.
3 Scroll to Advanced and press Select.
4 Scroll to Login and press Select.