Pioneer BDP-320 - Manual (Page 23)

23
En
03
• The out put video resolution depends on the video
out put terminal below.
• The out put video resolution setting can also be
switched by selecting Output Video Resolution
f rom the TOOLS menu.
 About Film material
The film mate rial is a video signal with a frame rate of 24
f rames/second. For example, these materials include
1080/24 p, 720/24p, etc.
 To output film material
To out put 1080/24p film material from HDMI OUT
te rminal, set the output video resolution to either Auto or
Source Direct.
Caution
• 1080/24 p signals can only be output from the HDMI
OUT terminal. They cannot be output from other
video te
rminals.
• When Auto is selected, the picture is output at 60
f rames/second if your TV is not compatible with 1080/
24 p signals.
• When Source Direct is selected, the signals are
out put as such, even if your TV is not compatible with
1080/24 p signals. If the picture is not displayed
properly, use OUTPUT RESOLUTION to set an output
video resolution at which the video and audio signals
a re properly output.
• Even if Auto or Source Direct is selected, 720/24p
video signals a re output at 60 frames/second.
 About the output video resolution
The out put video resolution setting and the resolution of the picture that is actually output differ for the different
te rminals. See the table below.
Auto


Output Video Resolution Source : 1080/60i
Current Output : 1080/60i
Video resolution of the
cu rrently playing disc
Out put video resolution
f rom the player
Example:
Output video
resolution
setting HDMI 1
1. The video out put terminal set at Video in the Setup Navigator (page 19) or the video output terminal selected with VIDEO SELECT (page 22).
COMPONENT/VIDEO 1
HDMI OUT terminal COMPONENT VIDEO/
VIDEO output
terminals HDMI OUT terminal COMPONENT VIDEO
output terminals 2
2. De pending on the BD, the pictures may not be output.
VIDEO output
terminal 2
Auto 3
3. This cannot be selected when the video out put terminal is set to COMPONENT/VIDEO.
Resolution preferred by
TV
4,5,6
4. The pictures are output with the preferred output resolution of the device (TV, AV receiver or amplifier, etc.) connected to HDMI OUT
te rminal.
5. Fo r details on the output of film material (1080/24p or 720/24p video signals), see To output film material above.
6. Sou rces with a resolution of 720/60p and 720/24p are output at 1080/60i even if the TV's recommended resolution is 1080/60p.
No video signals a re
out put
No video signals a re
out put
— —
480i 480/60i 480/60i 480/60i
480 p 480/60 p 480/60 p
1080i 1080/60i 1080/60i 7,8
7. DVD-Video o r DVD-R/-RW (VR format) may be output at 480/60p.
8. BD-ROM o r BD-R/-RE may be output at 480/60p.
1080 p 3 1080/60 p 9,10
9. De pending on the connected HDMI cable, the video signals may not be output.
10. Sou rces with a resolution of 720/60p and 720/24p are output at 1080/60i.
— —
Sou rce Direct Resolution recorded on
disc 5,11,12
11. De pending on the connected TV, the video signals may not be output.
12. 720/24 p film material is output at 720/60p.
Resolution recorded on
disc 8,11,12,13
13. 1080/24 p film material is output at 1080/60i.
480/60i
320_UXJCA_EN.book 23 ページ ２００９年２月１３日 金曜日 午後４時２６分