Software updating, Softwa, Re updating – Pioneer BDP-320 User Manual
Page 46: Resto, Ring all the settings to the factory default, Settings
06
46
En
Setting the output terminals
Set the te
rminals from which the player’s video and audio
signals a
re to be output.
1
Select and set Options
Output Terminal
Next Screen.
Use
/ to select, then press ENTER.
2
Select and set the video and audio output
terminals.
Select the actually connected video and audio out
put
te
rminals.
Use
/// to select, then press ENTER.
Fo
r details on the settings, refer to step 4 on page 19.
When
COMPONENT or VIDEO is selected for Video, no
sound is out
put from the
HDMI OUT terminal (a warning
message is dis
played).
Software updating
The softwa
re of the player can be updated by connecting
it to the Inte
rnet using a LAN cable.
Befo
re updating the software, make sure that you have
connected the
player to the network and made the
necessa
ry settings (pages 18 and 43).
Caution
• Do not un
plug the power cord during software
u
pdating. Otherwise, the updating will be aborted and
malfunction may occu
r with the player.
• The
re are two processes for software updating,
downloading and u
pdating. Both processes may take
a ce
rtain period of time.
• De
pending on the Internet connection conditions,
downloading may take a long time.
• Othe
r operations are defeated during software
u
pdating. Furthermore updating process cannot be
canceled.
• When the f
ront panel display is off, turn it on with
FL
DIMMER. When updating the player’s software with
the f
ront panel display off, do not unplug the power
co
rd until the
FL OFF indicator turns off.
Note
• Ste
ps
1 to
a
re the operations performed by the user
(they a
re intended to download the software from the
Inte
rnet).
• Ste
ps
a
re the operations performed
(automatically) by the
player (they are intended to
u
pdate the software).
1
When playback is stopped, display the Home
Menu screen.
P
ress
HOME MENU.
2
Select and set Initial Setup.
Use
/ to select, then press ENTER.
3
Select and set Options
Software Update
Start.
Use
/ to select, then press ENTER.
• If the
player is already running the latest software, the
message “The
player’s software is up to date and does
not need u
pdating.” is displayed.
4
Select and set Yes.
Use
/ to select Yes, then press ENTER.
• The hel
p menu is displayed if the player cannot
connect to the Inte
rnet. Check the connections and
settings (
5
Downloading of the software start.
The softwa
re download status is displayed on the screen.
• De
pending on the Internet connection conditions,
softwa
re downloading may take a certain period of
time.
6
Updating starts.
The f
ront panel display shows messages such as
“DATA CHECK”, “WRT SYS1”, “WRT DRV” and “WRT
FLC”.
• Softwa
re updating may take a certain period of time.
7
Updating completes.
The f
ront panel display shows
“DOWNLOAD OK” and
the
player turns off automatically.
Restoring all the settings to
the factory default settings
1
Check that the player’s power is turned on.
2
When a disc is playing, press
to stop playback.
Eject the disc f
rom the player.
3
While pressing
, press STANDBY/ON.
O
perate using the buttons on the player’s front panel.
Note
• Afte
r restoring all the settings to the factory default
settings, use
Setup Navigator to reset the player
• When all the settings a
re restored to the factory
defaults, all the data fo
r the secondary video (Picture-
in-Pictu
re), secondary audio, bookmarks, etc., is
e
rased.
320_UXJCA_EN.book 46 ページ ２００９年２月１３日 金曜日 午後４時２６分