Pioneer BDP-320 User Manual
Page 48
06
48
En
Note
• Only com
patible with 7.1-channel surround back. 6.1-channel surround back is output in 7.1 channels. In other
cases, out
put as audio signals of 5.1-channels or less.
• When out
putting linear PCM audio signals, if the number of compatible channels of the connected HDMI device
is lowe
r, the signals are output with the number of channels for which the device is compatible.
• The audio signals out
put from the
DIGITAL OUT terminal have a sampling frequency of 48 kHz (44.1 kHz for audio
CDs).
9. When the out
put video resolution is set to 480i or 480p, the signals may be output in linear PCM (2 channels) or Dolby Digital bitstream,
de
pending on
HDMI High Speed Transmission setting and/or the connected HDMI device (page 14).
10. If the connected HDMI device is not com
patible with DTS-HD Master Audio or DTS-HD High Resolution Audio, the signals are output in
linea
r PCM (7.1 channels) or DTS Digital Surround bitstream.
If the connected HDMI device is not com
patible with DTS Digital Surround bitstream, the signals are output in linear PCM (2 channels).
11. When the out
put video resolution is set to 480i or 480p, the signals may be output in linear PCM (2 channels) or DTS Digital Surround,
de
pending on
HDMI High Speed Transmission setting and/or the connected HDMI device.
320_UXJCA_EN.book 48 ページ ２００９年２月１３日 金曜日 午後４時２６分