Others, Othe – Pioneer BDP-320 User Manual

Page 62

Advertising
background image

07

62

En

Others

Softwa

re updating is slow.

De

pending on the Internet connection and other conditions, some time

may be

required to update the software.

• “WRT NG ****” is dis

played

on the f

ront panel display

du

ring software updating.

(**** meaning any
cha

racters)

• “WRT FAILED” is dis

played

on the f

ront panel display

du

ring software updating.

The message is dis

played when software updating has failed. Check

again whethe

r it can be updated properly.

A message othe

r than

“Netwo

rk connection test

com

pleted successfully” is

dis

played when

Connection

Test is performed.

Is “LAN cable not connected”
dis

played?

Check that this

player and Ethernet hub (or router with hub

functionality) a

re properly connected.

• Is “IP add

ress cannot be

obtained.” dis

played?

• Is “No

response from the

gateway.” dis

played?

• If the IP add

ress is obtained using the DHCP server function, check

the setting is co

rrect at the

Display Network Configuration

(

page 44). For details on the DHCP server function, see the operating

inst

ructions of the Ethernet hub (or router with hub functionality).

• Set the IP add

ress manually.

Is “IP add

ress is overlapped.”

dis

played?

• Check the o

peration and settings of the DHCP server function of the

Ethe

rnet hub (or router with hub functionality). For details on the DHCP

se

rver function, see the operating instructions of the Ethernet hub (or

router with hub functionality).

• If this

player’s has been set manually, reset the IP address of this

player or other components.

Is the Ethe

rnet hub (or router

with hub functionality)
o

perating properly?

• Check the settings and o

peration the Ethernet hub (or router with hub

functionality). Fo

r details, see the operating instructions of the Ethernet

hub.

• Reboot the Ethe

rnet hub (or router with hub functionality).

Problem

Check

Remedy

The

player’s power turns off

automatically.

Is

Auto Power Off set to

On?

If

Auto Power Off is set to On, the player’s power turns off

automatically if no o

peration is performed for over 30 minutes

(

page 41).

Is

Display Power Off set to

On?

The

player’s power may turn off together with the power of the TV

connected to the

HDMI OUT terminal. If you do not want the player’s

power to turn off when the TV’s power is turned off, set

Display Power

Off to Off (page 39).

The

player’s power turns on

automatically.

Is

KURO LINK set to On?

The

player’s power may turn on together with the power of the TV

connected to the

HDMI OUT terminal. If you do not want the player’s

power to turn on when the TV’s power is turned on, set

KURO LINK to

Off (page 39).

Playe

r cannot be operated

with

remote control.

Is an AV

receiver or amplifier

connected to the

CONTROL

IN terminal on the player’s
rear panel?

O

perate with the remote control of the device connected to the

CONTROL IN terminal.

A

re you operating the remote

cont

rol from a point too far

away f

rom the player?

O

perate from within 23 feet (7 m) of the remote control sensor.

A

re the batteries dead?

Re

place the batteries (page 7).

In

put of connected TV and AV

system switches
automatically.

Is

KURO LINK set to On?

The in

put of the TV and AV system (AV receiver or amplifier, etc.)

connected to the

HDMI OUT terminal may automatically switch to the

player when playback starts on the player or the menu screen (Home
Media Galle

ry, etc.) is displayed. If you do not want the inputs of the

connected TV and AV system (AV

receiver or amplifier, etc.) to switch

automatically, set

KURO LINK to Off (page 39).

“P

rocessing failed.” is

dis

played.

If the message a

ppears repeatedly, please ask your nearest Pioneer

autho

rized service center or your dealer to carry out repair work.

Problem

Check

Remedy

320_UXJCA_EN.book 62 ページ 2009年2月13日 金曜日 午後4時26分

Advertising