The initial setup menu – Pioneer DVR-LX70 User Manual

Page 117

Advertising
background image

The Initial Setup menu

117

En

14

Colour

RGB (0–255)

Use if colours are weak and black appears to ‘float’
on the

RGB (16–235) setting.

RGB (16–235)

Use this setting if colours appear overly rich and the
black too deep on the

RGB (0–255) setting.

YCbCr 4:2:2

The video signal is output as a YCbCr 4:2:2
component signal. This is the standard setting for
HDMI-compatible devices.

YCbCr 4:4:4

The video signal is output as a YCbCr 4:4:4
component signal.

• Depending on the connected device some settings may not be available.
• When a DVI device is connected, the

YCbCr 4:2:2 and YCbCr 4:4:4 options are not available.

Transmission Mode Auto

Select this setting to output video in the optimum
transmission mode according to the connected
device.

Normal

Select this setting when pictures are not shown
properly.

If you choose a setting that is incompatible with your TV you may not be able to see any picture at all. In this case,
press

OPEN/CLOSE while holding down the (Stop) button on the front panel to switch the setting.

Audio Output

Auto •

Dolby Digital, MPEG and DTS sources are output as a
bitstream signal. However, depending on the

Audio

Out setting, number of audio channels, and the HDMI-
connected device, Linear PCM audio may be output.

PCM

All audio signals are converted to Linear PCM (except
DTS).

Bitstream Priority Select if the connected device is compatible with

bitstream audio.

This setting is not available when a DVI device is connected.

HDMI Control

On •

Enable the HDMI Control function. Select this option
when connected to an HDMI Control-compatible
Pioneer plasma television, AV system (amplifier or AV
receiver etc.).

Off

Disable the HDMI Control function. Select this option
when not connected to an HDMI Control-compatible
component, or when connected to a component
manufactured by a company other than Pioneer.

• For more information about HDMI Control, see HDMI Control on page 22.
• This setting is available even if you are not connected to an HDMI device.
• For more information see Troubleshooting on page 127.

Setting

Options

Explanation

DVRLX70_TF_EN.book 117 ページ 2007年8月1日 水曜日 午後4時14分

Advertising
This manual is related to the following products: