Pioneer DVR-LX70 - Manual (Page 17)

Connections
17
En
02
Using other types of video
output
This recorder has standard (composite),
S-Video and component video outputs. The
main difference between them is the quality
of the picture. S-Video delivers a better
picture than composite video, while
component video gives better picture quality
still. The variety of outputs also gives you the
flexibility of connecting your particular
equipment using the best connection type
available.
1 Connecting using an S-Video output
S-Video carries the picture as separate
colour and luminance (brightness) signals.
There are two S-Video outputs for
connection to TVs, monitors, VCRs or other
equipment.
• Use an S-Video cable (not supplied) to
connect an S-VIDEO OUTPUT (1 or 2) to
an S-Video input on your TV, monitor (or
other equipment).
2 Connecting using the component
video output.
Component video carries the picture as two
separate colour signals, plus a luminance
(brightness) signal.
See also Component Video Out on page 110
for how to set up the component video
output for use with a progressive scan-
compatible TV.
• Use a component video cable (not
supplied) to connect the COMPONENT
VIDEO OUT jacks to a component video
input on your TV, monitor (or other
equipment).
TV
AC IN
DIGITAL AUDIO OUT
COAXIAL HDMI OUT CONTROL
IN
S-VIDEO VIDEO AUDIO L R
ANTENNA
IN
OUT
INPUT 1 /AUTO START REC
INPUT 3 S-VIDEO
VIDEO AUDIO L R
Y P B P R COMPONENT VIDEO OUT
OUTPUT 1
OUTPUT 2
COMPONENT
VIDEO OUT
1
2
To component
video input
To S-Video
input
S-VIDEO
OUTPUT
DVRLX70_TF_EN.book 17 ページ ２００７年８月１日 水曜日 午後４時１４分