Pioneer DVR-LX70 - Manual (Page 20)

Connections 02
20
En
Connecting to an AV
amplifier or receiver
To enjoy multichannel surround sound you
need to connect this recorder to an AV
amplifier/receiver using the digital coaxial
output. In addition to the digital connection,
we recommend also connecting using the
stereo analog connection.
You’ll probably also want to connect a video
output to your AV amplifier/receiver. Use the
standard (composite) video output (as
shown here), or the S-Video or component
video connections.
See also Audio Out on page 111 for how to
set up the digital audio output. (Noise may
be output from your speakers if the recorder
is not set up to work with your AV amplifier/
receiver.)
Important
• Do not connect this recorder to your TV
‘through’ your VCR or other component
using A/V cables. Always connect it
directly to your TV.
1 Connect RF antenna cables as shown.
This enables you to watch and record TV
channels.
2 Connect the AUDIO and VIDEO
OUTPUT jacks (1 or 2) on this recorder to
a set of audio/video inputs on your AV
amplifier/receiver.
3 Use an coaxial digital audio cable (not
supplied) to connect the DIGITAL AUDIO
OUT (COAXIAL) jack on this recorder to
an coaxial digital input on your AV
amplifier/receiver.
This enables you to listen to multichannel
surround sound.
1
4 Connect the AV amplifier/receiver’s
video output to a video input on your TV.
Note
1 If your AV amplifier/receiver doesn’t have an coaxial digital input, but has a optical type, converter boxes that
convert from coaxial to optical are available at specialist audio dealers.
AC IN
DIGITAL AUDIO OUT
COAXIAL HDMI OUT CONTROL
IN
S-VIDEO VIDEO AUDIO L R
ANTENNA IN
OUT
INPUT 1 /AUTO START REC
INPUT 3 S-VIDEO
VIDEO AUDIO L R
Y P B P R COMPONENT VIDEO OUT
OUTPUT 1
OUTPUT 2
TV
Antenna/cable TV
wall outlet
AV amplifier/receiver
ANTENNA
IN (RF IN)
ANTENNA
OUT
1
1
OUTPUT 1
3
DIGITAL
AUDIO OUT
2
4
To audio/video input
To antenna
input
To video
input
To digital
input
From video
output
DVRLX70_TF_EN.book 20 ページ ２００７年８月１日 水曜日 午後４時１４分