Pioneer DVR-LX70 - Manual (Page 22)

Connections 02
22
En
HDMI has the capability to support
standard, enhanced, or high-definition video
plus standard to multi-channel surround-
sound audio. HDMI features include
uncompressed digital video, a bandwidth of
up to five gigabits per second (Dual Link),
one connector (instead of several cables and
connectors), and communication between
the AV source and AV devices such as DTVs.
HDMI, the HDMI logo and High-Definition
Multimedia Interface are trademarks or
registered trademarks of HDMI Licensing LLC.
HDMI Control
By connecting this unit to an HDMI Control-
compatible Pioneer plasma television, AV
system (amplifier or AV receiver etc.) with an
HDMI cable, you can control this unit from
the remote control of a connected plasma
television, as well as have the connected
plasma television automatically change
inputs in response to this unit starting
playback.
Refer to the operating instructions for your
plasma television or AV system for more
information about which operations can be
carried out by connecting via HDMI cable.
Auto-select function
You can have a connected plasma television
or AV system automatically change inputs
when playback begins on this unit (including
when you have a GUI (such as Disc
Navigator) set to display on this unit).
Certain connected plasma televisions may
have their power turned from off to on when
using this function.
Simultaneous power function
You can have this unit turn on automatically
when the power for a connected plasma
television is turned on. To have this unit’s
power turned off when a connected plasma
television is turned off, you must change the
simultaneous power function of your plasma
television.
Unified language function
By receiving language information from a
connected plasma television, you can have
this unit’s language settings automatically
change to those of the plasma television
(language information can be received only
when no media is being played back and no
recordings are taking place, or when you
choose not to display this unit’s GUI
displays).
Important
• Depending on the type of plasma
television, some HDMI input terminals
do not support the HDMI Control
function. For details, see the operating
instructions supplied with your plasma
television.
• To use the following functions, set this
unit’s HDMI Control to Off (page 117).
– When you use Auto Start Recording
(page 47).
– When you want this unit to
automatically switch off upon
completion of timer recording. (When
HDMI Control is set to On, this unit
does not automatically switch off if your
plasma television is switched on upon
completion of timer recording.)
– When using the Video Control function
of an external component.
– Child lock settings (page 45).
• HDMI Control may not operate properly
if you do not use an HDMI cable that
supports the HDMI 1.3 Specification.
• Controls may not function properly in
certain situations, such as immediately
after you have connect an HDMI cable,
turn this unit’s power off or remove the
power cable for this unit or the
connected component. If you experience
any problems, set HDMI Control to On
for all connected units, and then display
the pictures stored on this unit on your
plasma television to improve the
situations.
• We cannot guarantee this unit will work
with HDMI Control-compatible
components other than those made by
Pioneer.
DVRLX70_TF_EN.book 22 ページ ２００７年８月１日 水曜日 午後４時１４分