Getting started – Pioneer DVR-LX70 User Manual

Page 31

Advertising
background image

Getting started

31

En

04

7

Select the TV screen type,

‘Wide (16:9)’ or ‘Standard (4:3)’.

8

Select whether or not your TV

is compatible with progressive scan
video.

9

Set the HDMI output (only

when an HDMI component is connected).

• Depending on the HDMI component you

have connected, the above screen may
not appear.

• Select

Yes if you want this unit to

automatically set the optimum setting
for the device connected to the HDMI
terminal.

• There are cases where nothing appears

on the screen after the automatic setup
due to an HDMI cable, etc. If you do not
perform any operations in this case, this
unit returns to the previous setting in
30 seconds.

• Select

No if you want to make this

setting later.

10

Press to continue after reading

the HDD caution.

11

Select ‘Finish Setup’ to exit

the Setup Navigator, or ‘Go Back’ if you
want to start again.

That completes basic setup using the Setup
Navigator.

• If there are blank channels with no

station, you can set these to skip using
the manual channel setting. See Manual
CH Setting
on page 109.

ENTER

k Setting

t Line System

er Save

P

p Navigator

p Navigator

TV Screen Size

Wide (16:9)

Standard (4:3)

ENTER

k Setting

t Line System

er Save

P

p Navigator

p Navigator

Progressive

Compatible

Not Compatible

Don't Know

Not Compatible

ENTER

k Setting

Line System

er Save

P

p Navigator

p Navigator

HDMI Setting

Yes

No

Set to the transmission mode optimized for
the connected device?
* Under this setting, nothing may appear
on the screen due to HDMI cables, etc.
The mode returns to the current setting
after 30 seconds.

ENTER

k Setting

t Line System

er Save

P

p Navigator

p Navigator

In the event of HDD failure, recordings may
be lost or normal playback/recording may
not be possible.

As recordings might be lost in case of a HDD
failure, we recommend to use the HDD only
as temporary storage media.

Please copy recordings you want to keep
to recordable DVD.

Press ENTER to continue.

ENTER

k Setting

t Line System

er Save

p Navigator

p Navigator

S e t u p i s c o m p l e t e !

F i n i s h S e t u p

G o B a c k

F i n i s h S e t u p

04 Getting_Started.fm 31 ページ 2007年9月11日 火曜日 午前11時2分

Advertising
This manual is related to the following products: