Pioneer DVR-LX70 - Manual (Page 48)

Recording 05
48
En
• To cancel Auto Start Recording, press
 STANDBY/ON while the recorder is in
standby. The
AUTO indicator goes off.
• To cancel Auto Start Recording once
recording has already started, press
 REC for three seconds (this cancels
Auto Start Recording, but recording
continues), then
F STOP REC to stop
recording.
• You can also stop recording by pressing
F STOP REC then selecting Yes to
confirm.
Tip
• Alternatively, with no OSD displayed,
press and hold the front panel F STOP
REC button for more than three seconds
to switch Auto Start Recording on
directly. After switching on, switch the
recorder into standby.
When using the Video Control function of an
external component, set the
HDMI Control
to Off (page 117).
Playing your recordings on
other DVD players
Most regular DVD players can play finalized
discs recorded in DVD-R/-RW (Video mode)
and DVD+R discs. A number of players
(including many Pioneer models) can also
play DVD-RW discs recorded in VR mode,
finalized or not. Most players will not play VR
mode DVD-R discs, although some
DVD-ROM drives and DVD recorders may be
able to (finalization might be necessary).
Check the manual that came with the player
to check what kinds of discs it will play.
When you finalize a DVD-R/-RW (Video
mode) or DVD+R disc, a title menu is
created from which you can select titles
when you play the disc. There are a number
of different styles of title menu to choose
from to suit the content of the disc.
All the title menus are navigated in the usual
way, pressing
MENU or TOP MENU to
display the menu, then using the ///
followed by ENTER to select titles and start
playback.
Finalizing a disc
Finalizing ‘fixes’ the recordings on the disc
so that it can be played on a regular DVD
player or computer equipped with a suitable
DVD-ROM drive.
1
Note that the disc name will appear in the
title menu after you finalize a disc. Make sure
the disc name is as you want it before you
finalize the disc as it can’t be changed
afterwards. If you want to rename the disc,
see Input Disc Name on page 102 before
starting the steps below.
DVD+RW discs don’t generally need
finalizing. However, if you want a title menu
to appear when you play the disc, then you
will need to finalize. When using a
DVD+RW, you can still record and edit even
after finalizing. although the title menu will
disappear if you do so. Finalize the disc
again to generate a new title menu.
Important
• Once you’ve finalized a DVD-R/-RW
(Video mode) or DVD+R disc, you can’t
edit or record anything else on that disc.
However, the finalization on a DVD-RW
disc maybe ‘undone’; see Undo Finalize
on page 103 for how to do this.
DVD (VR) DVD (Video) DVD+R DVD+RW
Note
1 If the TV line system of the disc is different to the current setting of the recorder, you will not be able to finalize
the disc. See Additional information about the TV system settings on page 119 for how to change the recorder’s
setting.
DVD (VR) DVD (Video) DVD+R DVD+RW
DVRLX70_TF_EN.book 48 ページ ２００７年８月１日 水曜日 午後４時１４分