Palm Ultralight Wireless Headset 3265WW - Manual

Product End-of-Life Disassembly Instructions for Palm Ultralight Wireless Headset
Product Identification:
Marketing Name / Model Description
Palm Ultralight Wireless Headset
3265WW Bluetooth headset
Only authorized recyclers are permitted to use these disassembly instructions. Any attempted
disassembly by a user or unauthorized party will void the product warranty and may irreparably damage
the product.
1.0 Tools Required
Tool Description Tool Size (if applicable)
Cutter pliers Medium
Long nose pliers Medium
Flat bladed screw driver Small
2.0 Product Disassembly Process
2.1 Listed below are the basic steps that should typically be followed to remove components and materials
requiring selective treatment:
1 Remove ‘switch button’ & all external plastics from ‘main housing’ of
headset (use long nose pliers)
Dispose of ‘plastics’ in accordance with local recycling laws
2 Remove ‘speaker assembly’ from ‘main housing’ of headset &
disassemble ‘speaker’ from plastic housing (use long nose pliers)
Dispose of ‘speaker’ & ‘plastics’ in accordance with local recycling
laws
3 Remove ‘PCB & Battery assembly’ from ‘main housing’ of headset
(use long nose pliers)
Dispose of ‘main housing’ plastics in accordance with local recycling
laws
4 Cut ‘battery’ leads and detach from ‘PCB’ (use cutter pliers)
Dispose of ‘battery’ & ‘PCB’ in accordance with local recycling laws
October 20, 2006