Registration, To register an additional handset, Select base – Philips ID937 User Manual
Page 41: To manually select best base station, Advanced settings
41
EN
Advanced Settings
3. Scroll
:
to
Number
and press
m
SELECT
.
4. The last stored Baby Call number is displayed (if any).
5. Enter the new Baby Call number and press
m
OK
to confirm.
A validation tone is emitted and the screen returns to previous menu.
Registration
The procedures described below are the procedures that you will find in your ID937 handset. The procedures
may vary according to the handset you want to register. In this case, please refer to the manufacturer of the
additional handset.
Additional handsets must be registered to the base unit before you can use them. Up to 6 handsets can be
registered to one base station.
To register an additional handset
1. On the base station, press and hold
p
for 3 seconds. After that, the registration procedure has to be
done within 1 minute.
2. At the same time, on the handset, press
m
MENU
, scroll
:
to
Advanced Set
and press
m
SELECT
,
scroll
:
to
Registration
and press
m
SELECT
.
3. Press
:
to select the Base to be registered to and press
m
OK
to confirm.
4. Enter the Master PIN when prompted and press
m
OK
to start registration.
A validation tone is emitted to indicate successful registration and the screen returns to stand-by mode.
Select Base
One ID937 handset can be registered to up to 4 different ID937 Base stations. By default, the handset will reg-
ister to BASE 1. If you select
Best Base
, the handset will register to the nearest base station.
To manually select best base station
1. Press
m
MENU
, scroll
:
to
Advanced Set
and press
m
SELECT
, scroll
:
to
Select Base
and press
m
SELECT
.
2. Scroll
:
to the desired base station and press
m
OK
to confirm.
3. The handset will start searching for the base station. If the selected base is found, a validation tone is emit-
ted.
The Master PIN is required before you can register or unregister handsets. The default PIN is
0000
.
Within 1 minute, the base station is able to accept registration from a handset. If there is no action
taken on the handset within 10 seconds, the registration procedure will be aborted.
If the PIN is incorrect,
Incorrect PIN
will be displayed and the handset returns to stand-by mode.
ID937_IFU_EN_US.book Page 41 Thursday, February 8, 2007 4:16 PM