Panasonic DIGA DMR-ES30V - Manual (Page 17)

Getting started
17
VQT0P03
Ge
ttin
g
s
tart
e
d
Change the remote control code on the main unit and on the remote
control (the two must match) if you place other Panasonic products
close together. When changing the remote control code, make sure
the two codes are same.
Use “MODE 1”, the factory set code, under normal circumstances.
[1] While stopped
Press [FUNCTIONS].
[2] Select “To Others” with [ 3, 4] and press
[ENTER].
[3] Select “SETUP” with [ 3, 4] and press [ENTER].
[4] Select “Others” with [ 3, 4] and press [2, 1].
[5] Select “Remote Control” with [ 3, 4] and press
[ENTER].
[6] Use [ 3, 4] to select the code (“MODE 1”,
“MODE 2” or “MODE 3”) and press [ENTER].
≥The code on the unit has been set.
[7] While pressing [ENTER], press and hold for about
2 seconds the numeric button ([1], [2] or [3])
corresponding to the code you selected in step 6.
≥The code on the remote control has been set.
[8] Press [ENTER].
∫ When the following indicator appears on the unit’s display
The unit’s remote control
code
Change the code on the remote control to match the main unit’s code
(
l step 7).
Choose the setting to suit your television and preference.
[1]
While stopped
Press [FUNCTIONS].
[2] Press [ 3,4] to select “To Others” and press
[ENTER].
[3] Press [ 3,4] to select “SETUP” and press
[ENTER].
[4] Press [ 3,4] to select “Connection” and press
[ 2, 1].
[5] Press [ 3,4] to select “TV Aspect” and press
[ENTER].
[6] Press [ 3,4] to select the TV aspect and press
[ENTER].
≥16:9: 16:9 widescreen television
≥4:3: 4:3 aspect television
[RAM] Titles are recorded as they appear on screen.
[DVD-V] Video recorded for a widescreen is played as Pan &
Scan (unless prohibited by the producer of the disc) (
l 66).
≥Letterbox: 4:3 aspect television
Widescreen picture is shown in the letterbox style ( l 66).
To turn the TV on/off, change the TV input mode, select the TV
channel and change the TV volume by means of this remote control,
set the remote control as follows.
Point the remote control at the TV
While pressing [ Í, TV], enter the code using the
numeric buttons.
e.g., 01: press [0] > [1].
Manufacturer and Code No.
≥Test by turning on the TV and changing channels. Repeat the
procedure until you find the code that allows correct operation.
≥If your TV brand is not listed or if the code listed for your TV does
not allow control of your TV, this remote control is not compatible
with your TV.
∫ To return to the previous screen
Press [RETURN].
∫To exit the screen
Press [RETURN] several times.
STEP 3 Set up to match your TV and remote control
Preparation
≥Press [DVD].
∫ When other Panasonic products respond
to this remote control
∫ Selecting TV type
DVD
Disc Protection Off DVD-RAM
FUNCTIONS
Recording
Dubbing
DIRECT NAVIGATOR
1 2 3 G-Code
To Others
Playback
ENTER
RETURN
DUBBING
PLAYLISTS
FLEXIBLE REC
TIMER RECORDING
DISC MANAGEMENT
Return
SETUP
Cartridge Protection Off
DVD
Disc Protection Off DVD-RAM
FUNCTIONS
Recording
Dubbing
DIRECT NAVIGATOR
1 2 3 G-Code
To Others
Playback
ENTER
RETURN
DUBBING
PLAYLISTS
FLEXIBLE REC
TIMER RECORDING
DISC MANAGEMENT
Return
SETUP
Cartridge Protection Off
∫ TV operation
Brand Code
Panasonic/National 01/02/03/04
GOLDSTAR/LG 15/16
HITACHI 08
JVC 07
MITSUBISHI 09/10
NEC 13
PHILIPS 12
SAMSUNG 17/18
SANYO 14/19
SHARP 11
SONY 05
TOSHIBA 06
SETUP
Disc
Picture
Sound
Display
TV Aspect
16:9
4:3
Letterbox
Connection
16:9 WIDE TV
4:3 TV
ENTER RETURN
SELECT
Tuning
Others
M7620(GN).book 17 ページ ２００５年５月２５日 水曜日 午後１２時２分