Gui (graphical user interface), Transfer (dubbing) (vhs, L 58) – Panasonic DIGA DMR-ES30V User Manual

Page 58: Transferring (dubbing), Vhs dvd, 1] press [dvd]. [2, 5] set the recording mode, 6] set the time limit, 8] select “yes” with [ 2 ] and press [enter, Numeric buttons

Advertising
background image

Transferring (Dubbing)

58

VQT0P03

VHS

DVD

You can transfer (dub) programmes recorded on a tape onto a disc

°

from the location

°° of playback as of the transfer (dubbing) start of

the tape.
° Available discs for transfer (dubbing) from tape are [RAM] [-R]

[-RW‹V›] [+R].

°° When you set the recording mode to “FR” and “Time Setting” to

“Off”, you can transfer (dub) the whole tape from the beginning to
the end. (

l 59)

Preparation
≥Select the unit viewing channel (e.g. AV input) on the TV.
VHS (Recording source)
≥Press [VHS].
≥Insert the video cassette containing the programme to be copied.

(

l 48)

≥Press [AUDIO] to select the audio you wish to record.
≥Stop the tape at the position where you wish to start recording.

DVD (Recording target)
≥Press [DVD].
≥Release protection. (disc

l 28, cartridge l 28) [RAM]

≥Insert a disc and confirm there is sufficient empty space for

recording on it. (

l 8, 47)

Settings (

l 42, TV System)

≥When transferring (dubbing) an NTSC tape to a DVD

- Set “TV System” on “Connection” in SETUP to “NTSC”.

≥When transferring (dubbing) a PAL tape to a DVD

- Set “TV System” on “Connection” in SETUP to “PAL”.

[1]

Press [DVD].

[2]

While both DVD and VHS are stopped

Press [FUNCTIONS].

[3]

Select “DUBBING” with [

3, 4] and press

[ENTER].

[4]

Set the transfer
(dubbing) direction.

≥Set “Source” to “VHS”.
≥If you are not going to change

the transfer (dub) direction,
press [

4], then skip to step 5.

To change the setting

(1)Make sure “Dubbing Direction” is selected and press [

1].

(2)Make sure “Source” is selected and press [ENTER].
(3)Press [

3, 4] to select “VHS” and press [ENTER].

≥When you set “Source” to “VHS”, “DVD” is automatically

selected on “Destination”.

(4)Press [

2].

(5)Press [

4].

[5]

Set the recording mode.

≥If you are not going to change

the recording mode, press [

4],

then skip to step 6.

To change the setting

(1)Make sure “Dubbing Mode” is selected and press [

1].

(2)Make sure “Recording Mode” is selected and press [ENTER].
(3)Select recording mode (XP, SP, LP, EP or FR) with [

3, 4]

and press [ENTER].
≥About FR mode (

l 59)

(4)Press [

2].

(5)Press [

4].

[6]

Set the time limit.

≥If you are not going to change

the recording time, press [

4],

then skip to step 7.

To change the setting

(1)Make sure “Dubbing Time” is

selected and press [

1].

(2)Make sure “Time Setting” is selected and press [ENTER].
(3)Select time setting (“On” or “Off”) with [

3, 4] and press

[ENTER].
≥When you select “Off”, proceed to Step (6) below.

(4)Press [

3, 4] to select “Dubbing Time” and press [ENTER].

(5)Press [

2, 1] to select “Hour” and “Min.” and press [3, 4] to

set the recording time, and then press [ENTER].
≥You can also set the time with the numeric buttons.
≥Maximum recording time is 8 hours.

(6)Press [

2].

(7)Press [

4].

[7]

Make sure “Start
Dubbing”
is selected
and press
[ENTER].

≥The confirmation screen

appears.

[8]

Select “Yes” with [

2]

and press [ENTER].

≥Transfer (dubbing) is started.
≥Transfer (dubbing) is automatically stopped when the tape

reaches the end or the remaining capacity of the disc is filled.
(A message appears on the TV screen and then disappears a
few seconds later.)

To stop transfer (dubbing) in the middle

Press and hold [RETURN] for about 3 seconds or more.

GUI (Graphical User Interface)

Transfer (Dubbing) (VHS

l DVD)

DVD ERASE

REC

REC MODE

TIME SLIP

STATUS

DISPLAY

VHS

DVD

CREATE

CHAPTER

JET REW

TIMER

DUBBING

A

B

C

F Rec

PROG/CHECK

REC

REC MODE

SLOW/

SEARCH

REW

FF

PLAY

S

OPERATION

SELECT

TIME SLIP

DIRECT NAVIGATOR

TOP MENU

RETURN

CANCEL/RESET

VOLUME

CH

INPUT SELECT

STATUS

DISPLAY

AUDIO

TV

VHS

DVD

TRACKING/V-LOCK

SUB MENU

JET REW

SKIP/ INDEX

FUNCTIONS

G-Code

DVD/ VHS

PROG/CHECK

AV

PLAY

FUNCTIONS

RETURN

AUDIO

VHS

DVD

INPUT SELECT

VHS

DVD

AUDIO

RETURN

INPUT SELECT

REC MODE

1

;

CH,

W, X

µ

3, 4, 2, 1

ENTER

FUNCTIONS

Numeric

buttons

DUBBING

Cancel All

Dubbing Direction

Source

VHS

DVD

Destination

Dubbing Mode

VHS

DVD

VHS-Video

SP

DUBBING

Cancel All

Dubbing Direction

Format

VHS-Video

SP

Recording Mode

Dubbing Mode

Dubbing Time

VHS

DVD

VHS-Video

Off

SP

DUBBING

Cancel All

Dubbing Direction

Time Setting

Destination Capacity: 2:00

Off

Dubbing Mode

Dubbing Time

VHS

DVD

VHS-Video

Off

SP

DUBBING

Cancel All

Dubbing Direction

Press ENTER to start dubbing.

Dubbing Mode

Dubbing Time

VHS

DVD

VHS-Video

1:15

SP

Start Dubbing

ENTER

RETURN

M7620(GN).book 58 ページ 2005年5月25日 水曜日 午後12時2分

Advertising