Panasonic DIGA DMR-ES30V - Manual (Page 65)

Transferring (Dubbing)
65
VQT0P03
Tr
an
sf
er
ri
n
g
(D
ub
bi
ng
)
VHS DVD
When connecting to the AV3 input terminals on the front of the
unit
≥You can also connect to the AV1 or AV2 input terminals on the rear of
the unit.
Before connecting any cables, first make sure that the power for
the unit and the external device are off. Then, after connecting
cables, turn on both.
Note
≥If the audio output of the other equipment is monaural, connect to L/
MONO. (Both left and right channels are recorded when connected
through L/MONO.)
≥The S VIDEO IN terminal achieves a more vivid picture than the
VIDEO IN terminal.
Preparation
≥Select the unit viewing channel (e.g. AV input) on the TV.
DVD [RAM] [-R] [-RW‹V›] [+R]
≥Release protection (disc l 28, cartridge l 28). [RAM]
≥Press [DVD].
≥When recording bilingual programmes
[RAM]
When both M 1 and M 2 is selected on the connected equipment, you can select the audio type in playback.
[-R] [-RW‹V›] [+R]
Select either M 1 or M 2 on the connected equipment. (You cannot switch between audio types during playback.)
≥When the output signal from the external equipment is NTSC, change the “TV System” to “NTSC” in the SETUP menu ( l 42).
≥This unit cannot record to discs containing both PAL and NTSC signals.
VHS
≥Insert a video cassette with an accidental erasure prevention tab. (
l 48)
≥Press [VHS].
[1] Press [REC MODE] to select the recording mode. (DVD l 23, VHS l 51)
≥DVD [RAM] [-R] [-RW‹V›] [+R]
- It is also possible to perform Flexible Recording (FR). ( l 24)
[2] While stopped
Press [CH, W, X] or [INPUT SELECT] to select the input channel for the equipment you have
connected.
≥Select AV1, AV2 or AV3.
Follow the above steps 1 to 2.
[3] Start play on the external device.
[4] Press [ ¥, REC] at the point where you want to
start recording.
Follow the above steps 1 to 2.
[3] Press [ 1, PLAY].
≥Start playing the video cassette and find the recording start
point.
[4] Press [ ;, PAUSE], then press [¥, REC].
≥Put the unit in recording standby mode.
[5] Start play on the external device.
[6] Press [ ;, PAUSE] at the point where you want
to start recording.
∫ To skip unwanted parts
Press [ ;, PAUSE] to pause recording. (Press again to restart recording.)
∫ To stop recording
Press [ ∫, STOP].
For your reference
≥Almost all videos and DVD software on sale have been treated to prevent illegal copying. Such software cannot be recorded.
Recording from an external device
EJECT
S VIDEO IN
VIDEO IN – AUDIO IN – R L/MONO
AV3
C
(2)
(1)
(3)
(1) Audio/Video cable (not supplied)
A Yellow (VIDEO)
B White (L)
C Red (R)
(2) S Video cable (not supplied)
(3) External device
(Playback equipment)
1 DVD 1 VHS
M7620(GN).book 65 ページ ２００５年５月２５日 水曜日 午後１２時２分