Reference, Vhs dvd – Panasonic DIGA DMR-ES30V User Manual

Page 73

Advertising
background image

Reference

73

VQT0P03

VHS

DVD

Re

fe

re

nc

e

DVD recording, timer recording

Page

DVD Edit

Page

VHS Picture

Page

VHS Sound

Page

VHS Play

Page

Cannot record.

≥You haven’t inserted a disc or the disc you inserted cannot be recorded on. Insert a disc the

unit can record onto.

≥The disc is unformatted. Format the disc. [RAM] [-RW‹V›]
≥The write-protect tab on the cartridge is set to “PROTECT” or the disc is protected with

“DISC MANAGEMENT”.

≥Some programmes have limitations on the number of times they can be recorded (CPRM).
≥The disc is full or nearly full. Erase unneeded titles or use another disc.
≥You cannot record on finalized DVD-R, DVD-RW (DVD-Video format), +R or DVD-RW

(DVD Video Recording format) discs.

≥If you repeatedly insert discs or turn the unit on and off about 50 times or more, the

recording or editing of DVD-R, DVD-RW (DVD-Video format), +R may be disabled.

≥A DVD-R, DVD-RW (DVD-Video format), +R recorded on the unit may not be recordable

on other Panasonic DVD recorders.

≥The material you are trying to record is copy-protected.
≥This unit cannot record to discs containing both PAL and NTSC signals.

6

29
28

6, 66

20, 28, 31

29


A part or whole of a recorded
title has been lost.

≥If the power shuts down or the plug is disconnected from the household mains socket while

recording or editing, the title may be lost or the disc may become unusable. We cannot
offer any guarantee regarding lost titles or discs. You will have to format the disc
(

[RAM] [-RW‹V›]) or use a new disc.

Cannot format.

≥The disc is dirty. Wipe with a damp cloth and then wipe dry.
≥You tried formatting a disc that is not compatible with the unit.

9
6

Cannot create chapters.

Cannot mark the start point or
the end point during “Partial
Erase
operation.

≥The unit writes the chapter division information to the disc when you turn it off or remove

the disc. The information is not written if there is an interruption in the power before this.

≥These operations are not possible with still pictures.
≥You cannot set points if they are too close to each other. You cannot set an end point

before a start point.


Cannot erase chapters.

≥When the chapter is too short to erase, use “Combine Chapters” to make the chapter

longer.

33

The available recording time
doesn’t increase even after
erasing recordings on the disc.

≥Available recording space on the DVD-R or the +R does not increase even after erasing

previously recorded titles.

≥Available recording space on a DVD-RW (DVD-Video format) increases only when the last

recorded title is erased. It does not increase if other titles are erased.

Cannot create a playlist.

≥You cannot select all the chapters in a title at once as the source of playlist edition if the title

also includes still pictures. Select them individually.

VHS

Video output on VHS does not
look natural.

≥Use the Fine Tuning function on VHS.

48

OSD messages do not appear.

≥Go to VHS FUNCTIONS menu and select “4:3” or “WIDE” in “OSD”.

Press [STATUS] to show the on-screen messages constantly.

54, 55

Cannot hear the desired audio
type.

≥Press [AUDIO] to select the audio.
≥You cannot change the audio while you use the DC channel.

55
64

There is noise when playing a
video tape.

≥Adjust the tracking.
≥The tape is old or damaged.

50

Playback does not work
properly.

≥The video head is dirty.
≥The tape is too old or damaged.
≥Check the SQPB setting.
≥The video heads are clogged or worn: consult your dealer (for Australia only, Panasonic

Customer Care Centre for advice on 132600).

48

54

M7620(GN).book 73 ページ 2005年5月25日 水曜日 午後12時2分

Advertising