Using subwoofer output, Using nonfading output, Using the high pass filter – Pioneer AVH-P6600DVD User Manual

Page 69: Audio adjustments

Advertising
background image

1 Touch A.MENU and AUDIO and then

touch LOUDNESS.

2 Touch

to turn loudness on.

# To turn loudness off, touch

.

3 Touch

or

to select a desired level.

Each time you touch

or

selects level in

the following order:

LOW (low)MID (mid)HIGH (high)

Using subwoofer output

This unit is equipped with a subwoofer output

which can be turned on or off.

! When the subwoofer output is on, you can

adjust the cut-off frequency and the output

level of the subwoofer.

1 Touch A.MENU and AUDIO and then

touch SUB WOOFER.

# When the subwoofer controller setting is
FULL, you cannot select SUB WOOFER.

2 Touch

to turn subwoofer output on.

# To turn subwoofer output off, touch

.

3 Touch

and then touch

or

to se-

lect the phase of subwoofer output.

Touch

to select normal phase and

NORMAL appears in the display. Touch

to

select reverse phase and REVERSE appears in

the display.

4 Touch

and then touch

or

to ad-

just the output level of the subwoofer.

Each time you touch

or

increases or de-

creases the level of the subwoofer. +6  6 is

displayed as the level is increased or de-

creased.

5 Touch

and then touch

or

to se-

lect cut-off frequency.

Each time you touch

or

selects cut-off

frequencies in the following order:

50Hz80Hz125Hz

Only frequencies lower than those in the se-

lected range are outputted from the sub-

woofer.

Using nonfading output

When the nonfading output setting is on, the

audio signal does not pass through this units

low pass filter (for the subwoofer), but is out-

putted through the RCA output.

1 Touch A.MENU and AUDIO and then

touch NON FADING.

# When the subwoofer controller setting is only
FULL, you can select NON FADING. (Refer to
page 89.)

2 Touch

to turn non fading output on.

# To turn non fading output off, touch

.

3 Touch

or

to adjust the output

level of the non fading.

Each time you touch

or

increases or de-

creases the level of the non fading. +6  6 is

displayed as the level is increased or

decreased.

Using the high pass filter

When you do not want low sounds from the

subwoofer output frequency range to play

from the front or rear speakers, turn on the

HPF (high pass filter). Only frequencies higher

than those in the selected range are outputted

from the front or rear speakers.

Audio Adjustments

En

69

Section

14

Audio

Adjustments

Advertising