Panasonic AJ-D610WBp - Manual (Page 131)

– 131 –
Item
READ
SELECT
WRITE
SELECT
CARD CONFIG
READ USER
DATA
Variable
range
——
1
(fixed)
——
1
(fixed)
——
——
Remarks
This loads (reads) the data from the
setup card.
This item is always set to “1”. [It
cannot be used when the Picture Link
adaptor board (AJ-YAP900, optional
accessory) has not been installed.]
This saves (writes) the camera’s data
onto the setup card.
This item is always set to “1”. [It
cannot be used when the Picture Link
adaptor board (AJ-YAP900, optional
accessory) has not been installed.]
This formats the setup card.
This loads (reads) the user area data
in the camera’s memory.
VF
display
ENG
ENG
ENG
ENG
ENG
ENG
MAIN Menu Screen 3 of 4 (SUB menus)
CARD READ/WRITE screen
The operations for loading the menu data from the setup card, saving it on the setup card, and configuring the setup card are set
on this screen.
Align the arrow (
> ) with the item and press the UP or DOWN button to initiate the corresponding operation.
{
C A R D
C A R D
R E A D
R E A D
/ WR I T E
WR I T E
R E A D
S E L E C T
S E L E C T
1
1
CON F I G
U S E R D A T A
¢|
The underlining in the variable range column indicates the setting in the preset mode.
USER menu: The USER menu appears when the MENU switch is set to SET.
ENG menu:
The ENG menu appears when the MENU switch is set to SET while the SHIFT/ITEM button and UP button are
held down together.