Panasonic AJ-D610WBp - Manual (Page 64)

– 64 –
WIDE
CH1 CH2
20
0
EMPHASIS
dB
10
30
40
E TAPE F
E BATT F
RF SERVO HUMID SLACK
DF SLAVE TCG HOLD
h min s frm
CH1 CH2
20
0
EMPHASIS
dB
10
30
40
E TAPE F
E BATT F
RF SERVO HUMID SLACK
DF SLAVE TCG HOLD WIDE
h min s frm
Displays
Remaining Battery Level and Audio Level Displays
Audio CH level meter
VTR Section Operation/Status-Related Displays
Warning display
RF:
Lights when video head clogging occurs.
SERVO: Lights when the servo is out of order.
HUMID: Lights when condensation occurs on the head drum.
SLACK: Lights when tape wind-up trouble occurs.
Á
See “Warning System” (page 149) for a detailed description.
Lights
DF
SLAVE
TCG
HOLD
WIDE
Error code:
Indicated in the display
window.
Remaining battery level
When the digital display (%
display) battery is used, the
7 segments light up all the way
to the “F” position if the remain-
ing battery level is more than
70%.
If the remaining battery level is
under 70%, one of the seg-
ments goes off for each further
10% reduction in the remaining
level.
Remaining tape length
When the amount remaining
on the tape is more than
21 minutes long, all seven
segments up to the “F” position
appear lighted.
When it is less than 21 minutes
long, one segment will go off
for every 3-minute reduction in
the length.