75 – adjusting the white balance/black balance, Adjusting the black balance – Panasonic AJ-D610WBp User Manual

Page 75

Advertising
background image

– 75 –

Adjusting the White Balance/Black Balance

The black balance must be adjusted in the following cases.

Á

When the unit is used for the first time

Á

When the unit is first used after an extended period of non-use

Á

When the unit is used under conditions where the ambient temperature has changed by a wide
margin

Á

When the gain selector value is changed

Á

When the super gain setting has been changed using the SUPER GAIN button

Á

When the gamma ON/OFF is changed

Adjusting the Black Balance

1

Set the switches as shown in the figure.

2

Press the AUTO W/B BAL switch to the ABB side and then release the switch.
The switch returns to the center and the black balance is automatically adjusted.

3

During the adjustment, the following message will appear on the viewfinder screen. (Howev-
er, the message appears only when the display mode is set to “2” or “3”.)

Á

The lens iris automatically goes to the “CLOSE” position during the adjustment.

OUTPUT: CAM

MENU SET/OFF: OFF

AUTO W/B BAL switch

Message during adjustment

A B B

A C T I V E

Advertising