Specifications – Panasonic WV-CL920 User Manual
Page 39
Pick-up Device:
768 (H) x 494 (V) pixels, Interline Transfer CCD
Scanning Area:
6.45 (H) x 4.84 (V) mm (Equivalent to scanning area of 1/2” pick-up tube)
Scanning:
525 lines/60 fields/30 frames
Horizontal:
15.734 kHz
Vertical:
59.94 Hz
Synchronization:
Internal, Line-locked, External (VS/VBS) or
Multiplexed Vertical Drive (VD2) selectable
Video Output:
1.0 V[p-p] NTSC composite 75
Ω
/BNC connector
Horizontal Resolution:
480 lines (C/L), 570 lines (B/W)
Signal-to-Noise Ratio:
50 dB (AGC OFF, weight ON)
Minimum Illumination:
0.3 lx (0.03 footcandle) at F1.4 (C/L), 0.02 lx (0.002 footcandle) at F1.4 (B/W)
Gain Control:
AGC ON or OFF (SET UP MENU) selectable
White Balance:
ATW1, ATW2 or AWC (SET UP MENU) selectable
Aperture:
Variable (SET UP MENU)
Electronic Light Control:
Equivalent to continuous variable shutter speeds between 1/60 s and 1/10 000 s
AGC:
ON (DNR-H), ON (DNR-L) or OFF (SET UP MENU) selectable
Backlight Compensation:
Preset ON or OFF (SET UP MENU) selectable
Electronic Shutter Speed:
1/60 (OFF), 1/100, 1/250, 1/500, 1/1 000,1/2 000,1/4 000, 1/10 000 s selectable
Lens Mount:
CS-mount
ALC Lens:
DC or Video selectable
Ambient Operating Temperature:
–10°C - +50°C (14°F - 122°F)
Ambient Operating Humidity:
Less than 90 %
Power Source and
WV-CL920:
120 V AC 60 Hz 4.8 W
Power Consumption:
WV-CL924:
24 V AC 60 Hz 4.9 W
12 V DC 460 mA
-40-
SPECIFICATIONS