Panasonic KX-FPC95 - Manual (Page 86)

If you hear slow beeps, erase the
recorded messages (p. 73). The
beeps will stop.
Voice guidance example:
“Start transmission.”
“Transmission is complete.”
“Transmission has failed.”
“Transmission has been interrupted.”
“Start reception.”
“Reception is complete.”
“Reception has failed.”
“Reception has been interrupted.”
“ON”: You do not have to press
for fax reception. FAX START
If you wish to hear the voice
guidance (see right) at each fax
transmission/reception, set this
feature to “ON”.
● To hear the voice guidance only
when fax transmission/reception
fails, select “ERROR”.
FAX 1 GUIDANCE
#47
Features Summary
86
(The default setting is in bold type.)
Programming table (cont.)
Code Display & Feature Settings How the unit operates
#46 To receive a fax automatically
when you answer a call and hear
a fax calling tone (slow beep).
FRIENDLY 1 RCV
ON
OFF
#44 To alert you with beeps when a
received document is stored into
memory due to a problem.
RECEIVE 1 ALERT
ON
OFF
Advanced features (cont.) !
If you hear slow beeps, clear the
printing problem or supply paper to
print the stored document. The
beeps will stop.
How to set menu options
1. Press .
2. Rotate until the following is displayed.
Display:
Press and rotate until the desired
feature is displayed.
3. Press .
4. Rotate until the desired setting is displayed.
5. Press .
6. Press . MENU
SET
JOG DIAL
SET
JOG DIAL SET
ADVANCED 1 MODE
JOG DIAL
MENU
Note:
● Step 4 may be slightly
different depending on the
feature.
● See page 82 for more details.
#43 To alert you with beeps when there
is less than 60 seconds of
remaining recording time.
REC. 1 TIME 1 ALERT
ON
OFF
ON
OFF
ERROR