Radio, Radio mode display, Radio menu display – Panasonic CQ-C8803N User Manual

Page 20: Mono (monaural), Local, Audio filter (if), Preset, D·m set

Advertising
background image

20

CQ-C8803N

Radio

Band

Frequency

Preset Number

Radio Mode Display

Lights when LOCAL is
activated. (

a

page 20)

Lights while receiving an FM stereo signal.

Lights when MONO is activated. (

a

page 20)

Radio Menu Display

In the AM mode, only AUDIO FILTER and LOCAL can be
selected.

1

Press [MENU] to

display the menu

display.

For using the remote
control, hold down
[SEL](MENU) for 2
sec. or more.

2

Press [

}

] or [

{

] to select a mode to be

adjusted.

3

Press [BAND]
(SET) to adjust.

4

Press [MENU] to

confirm the

adjustment.

For using the remote control, hold down [SEL]
(MENU)
for 2 sec. or more.

MONO (Monaural)

Noise reduction when the signal strength decreases

: Receiving in stereo (default)

: Receiving in mono and reducing the noise level

LOCAL

Setting when searching for a station

: Searching even for a relatively low-intensity

radio wave station (default)

: Searching only for a high-intensity radio wave

station

AUDIO FILTER (IF)

IF filter setting for noise suppression

: Wide range

: Middle range (default)

: Narrow range

PRESET

You can select 6 or 18 stations for FM presetting with the
use of APM.

:

Presets 6 stations to FM1 to FM3 respectively, that is, 18
stations in total at the same time. This function is useful
for presetting more than 6 stations. (default)

:

Presets 6 stations with good reception to the selected
band from FM1 to FM3. This function is useful for preset-
ting stations in different areas in different bands.

D·M SET

(

a

page 21)

DISP
PTY

DISP
PTY

Advertising