Pioneer KEH-P4020R - Manual (Page 17)

Audio Adjustments
En 16
Introduction of audio
adjustments
1 AUDIO display
Shows the audio adjustments status.
2 LOUD indicator
Appears in the display when loudness is
turned on.
Press AUDIO to display the audio function
names.
Press
AUDIO repeatedly to switch between the
following audio functions:
FAD (balance adjustment)— EQ-L (equalizer)—
LOUD (loudness)— FIE (front image
enhancer)— SLA (source level adjustment)
• When selecting the FM tuner as the source,
you cannot switch to
SLA .
• To return to the display of each source, press
BAND .
Note
• If you do not operate the audio function within
about 30 seconds, the display is automatically
returned to the source display.
Using balance adjustment
You can select a fader/balance setting that pro-
vides an ideal listening environment in all occu-
pied seats.
1 Press AUDIO to select FAD .
Press AUDIO until FAD appears in the display.
• If the balance setting has been previously
adjusted,
BAL will be displayed.
2 Press
5 or ∞ to adjust front/rear speaker
balance.
Each press of
5 or ∞ moves the front/rear
speaker balance towards the front or the rear.
•
FAD F15 – FAD R15 is displayed as the
front/rear speaker balance moves from front to
rear.
•
FAD 0 is the proper setting when only two
speakers are used.
3 Press
2 or 3 to adjust left/right speaker
balance.
When you press
2 or 3,
BAL 0 is displayed.
Each press of
2 or 3 moves the left/right
speaker balance towards the left or the right.
•
BAL L9 – BAL R9 is displayed as the left/right
speaker balance moves from left to right.
1 2
English
Español
Deutsch
F
rançais
Italiano
Nederlands