Error messages, Additional information 12 – Pioneer S-DV440 User Manual

Page 65

Advertising
background image

Additional information

12

65

En

English

Français

Deutsch

Nederlands

Italiano

Español

Error Messages

Considerable noise in
radio broadcasts
(

continued

).

• Connect an outdoor FM antenna (see

Connecting external antennas

on

page 52).
• Connect an additional internal or external AM antenna (refer to the Setup
Guide and

Connecting external antennas

on page 52).

• Turn off any other equipment that may be causing the noise or move it away
from the main unit.
• The tuning interval is incorrect for your country or region. Try switching the
tuning interval (frequency step) (see

Frequency step setting

on page 58).

Auto tuning does not
pick up some stations.

• The radio signal is weak. Auto tuning will only detect radio stations with a
good signal. For more sensitive tuning, connect an outdoor antenna.

Sound is mono only.

• Check that the tuner is not set to FM mono (see

Improving poor FM

reception

on page 22).

Problem

Remedy

Message

Description

Child Lock

• This message appears when the front panel buttons are pressed when the
child lock feature is active. See

Child lock setting

on page 57 for more on

switching on/off the child lock.

Rec Mode On

• Blinks rapidly for 2 seconds when an operation is prohibited because the
Recording Mode is on (see

Recording mode

on page 53).

Phones In

• Blinks rapidly for 2 seconds when an operation is prohibited because
headphones are connected.

96k Stereo

• Blinks rapidly for 2 seconds when an operation is prohibited because the
source is digital 88.2 or 96kHz PCM.

No Surr. SP

• Blinks rapidly for 2 seconds when an operation is prohibited because there
is no surround speaker output.

Muting

• Blinks rapidly for 2 seconds when an operation is prohibited because the
sound is muted (press the

MUTE

button to turn the sound on).

Exit

• Appears briefly when a menu is automatically exited after a set period of
inactivity.

SR+ Error

• Appears when there is a communication problem between the unit and the
plasma display. Check all connections and retry.

XV-DV323.book 65 ページ 2004年2月10日 火曜日 午後6時10分

Advertising
This manual is related to the following products: