Playback, Various playback functions, English – Pioneer DV-420V-S User Manual
Page 17
En
Section
04
English
17
<J2L90901A>
Playback
17
16
Various playback functions
It may not be possible to use some of these functions, depending on the type of disc or file.
Starting playback from where
it was stopped (Resume Play)
When STOP is pressed during playback, the point at
which playback was stopped is stored in the memory.
When PLAY is pressed, playback resumes from the
point at which it was stopped.
To cancel the resume play, press STOP while play‑
back is stopped.
Resume Play may not possible for certain discs.
Storing the stop point for
ejected discs (Last Memory)
The player stores the point at which ejected DVD‑Video
discs (for up to five discs) and Video CDs (for one disc)
were stopped. When the disc is reloaded and PLAY
is pressed, playback starts from the point at which the
disc was stopped before it was ejected.
To cancel the last memory setting, press STOP
while playback is stopped.
If you do not want the player to store the point at which
playback was stopped, press OPEN/ CLOSE during
playback to eject the disc.
For some discs, the point at which playback was
stopped cannot be stored. When the limit for the
number of discs for which the stop point can be stored
is exceeded, the older settings are overwritten.
Forward and reverse scan‑
ning
During playback, press / / or / / .
The speed changes each time the button is pressed.
The speed steps differ according to the disc or file.
With DVD‑Video and DVD VR discs, when / /
is pressed once during playback, the picture and
sound are played at about 1.4 times the regular speed.
Note that the sound may not be output or may be
broken.
To resume normal playback, press PLAY.
Frame‑by‑frame forward/
frame‑by‑frame reverse play
While playback is paused, press / / or / /
.
The picture moves a frame forward or backward each
time the button is pressed.
To resume normal playback, press PLAY.
No sound is produced during frame‑by‑frame forward/
reverse play.
The picture may shake during frame‑by‑frame reverse
play.
Frame‑by‑frame reverse play is not possible for Video
CDs and video files.