Pioneer DV-420V-S - Manual (Page 32)

En
Section
05
32
<J2L90901A>
Changing the Settings (Initial Settings)
32
Options settings
Options settings Settings
KURO LINK
On
Select this to operate the player using the remote control of the
AV device connected using an HDMI cable. For details, see About
KURO LINK function on page 14.
Off
Select this when you do not want to control the player with the
remote control of the AV device connected using an HDMI cable.
Parental Lock
Password
Register (change) the password required for playing discs for
which the Parental Lock function is set. For details, see Registering
(changing) the password on page 33.
Level Change
Change the player’s Parental Lock level. For details, see Changing
the Parental Lock level on page 33.
Country Code
Change the country/ area. Refer to Country/Area Code Table on
page 42 when performing this operation.
DivX VOD
Activate
Display the player’s registration code required to play DivX VOD
files.
Deactivate Display the VOD deactivation code.
 DivX VOD files are protected by DRM. They can only be played on registered devices.
 If the registration code has not been authorized, DivX VOD files cannot be played. Authorization Error
appears on the TV screen if you attempt to play such files.
 For some DivX VOD files, the number of viewings is restricted. The remaining number of authorized views is
displayed on the TV screen when such files are played. Rental Expired is displayed when the remaining num‑
ber of viewings reaches 0.
Auto Power Off
On
Select this to turn the power off automatically (the power turns off
automatically if no operation is performed for over 30 minutes).
Off Select this if you do not want the power to turn off automatically.
The factory default settings are indicated in italic.
When Other Language is selected
Select one of 136 languages. See Language
Code Table on page 42 when performing this
operation. If a language not included on the
DVD‑Video disc is selected, the language is
set to one of the languages on the disc.
1 Select Other Language.
Use
/  to select, then press ENTER.
2 Select List of Languages or Code.
Use
/  to select, then press ENTER.
 There are some languages for which only
the code number is displayed. For details,
see Language Code Table on page 42.
3 Select the language code.
Use
/  or number buttons (0 to 9) to
select, then press ENTER.