Wireless system connection, Other speaker setup options, Fitting optional speaker stands – Panasonic SCHT56 User Manual

Page 7: Attaching to a wall, Caution, Step 1 speaker setup

Advertising
background image

7

RQTX0175

1

2

PUSH

PUSH

Digital transmitter cover

Rear panel of the main unit

TRANSMITTER

DIGITAL

PUSH

PUSH

Push!

Push!

STEP 1

Speaker setup

Set your sound free with Panasonic’s wireless
receiver and speaker systems

Attach the SH-FX67 digital transmitter for wireless surround sound.
You can also connect your portable audio equipment to the wireless
system.
For details, refer to the operating instructions for SH-FX67.

Wireless system connection

You can use the blunt end of a writing instrument
to push here until the cover pops out.

Remove the digital transmitter cover before installing any optional
Panasonic wireless accessory.

Replace the cover when the digital transmitter is not in use.

Note

Other speaker setup options

Turn off all components before making any connections.

Peripheral equipment and cables sold separately

unless otherwise indicated.

To connect equipment, refer to the appropriate

operating instructions.

Fitting optional speaker stands

(For front, center and surround speakers)

Ensure the stands meet these conditions before purchasing them.
Note the diameter and length of the screws and the distance between
screws as shown in the diagram.

The stands must be able to support over 10 k

g (22 lb.).

The stands must be stable even if the speakers are in a high position.


Attaching to a wall

You can attach the surround, center and front speakers to a wall.

The wall or pillar on which the speakers are to be attached should be capable of supporting 10 k

g (22 lb.) per screw. Consult a

qualified building contractor when attaching the speakers to a wall. Improper attachment may result in damage to the wall and
speakers.

Plate thickness plus

7.0 mm (

9

/

32

") to

10 mm (

13

/

32

")

Speaker stand
(not included)

Metal screw
hole
For attaching
to speaker
stands.

Example: Surround speaker

5.0 mm (

3

/

16

"), pitch 0.8 mm (

1

/

32

")

At least 30 mm (1

3

/

16

")

Front speakers

Drive the screw (not included) into the wall

Fit the speaker securely onto the screw(s) with the hole(s)

Ø4.0 mm (

5

/

32

")

Ø7.0 mm (

9

/

32

")

to 9.4 mm (

11

/

32

")

4.0 mm (

5

/

32

")

to 6.0 mm (

1

/

4

")

Wall or pillar

Center speaker

Surround speaker

190 mm
(7

15

/

32

")

If irregular coloring occurs on your television
The supplied speakers are designed to be used close to a
television, but the picture may be affected with some televisions
and setup combinations.
If this occurs, turn the television off for about 30 minutes.
The television's demagnetizing function should correct the
problem. If it persists, move the speakers further away from the
television.

Caution

Use the speakers only with the recommended
system. Failure to do so can damage the
amplifier and speakers, and can cause fire.
Consult a qualified service person if damage
occurs or if a sudden change in performance
is apparent.
Do not attempt to attach these speakers
to walls using methods other than those
described in this manual.

Notes on front speakers
These speakers do not have magnetic shielding. Do not place
them near televisions, personal computers or other devices
easily influenced by magnetism.

SC-HT56P_MP (RQTX0175-2P).indb 7

9/19/2008 12:28:08 PM

Advertising